We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized 90-degree reducing elbow, 3 by 2 inches, threaded ends

Legend Valve

Legend Valve 352-135 3" x 2" galvanized reducing elbow bathware

SKU CH-HRHC-4C121

Galvanised 90° reducing elbow with 3" x 2" FNPT connections for bathware plumbing

  • ColorTransparent
  • Size3" x 2"
  • TypePipes, Valves & Fittings
  • 3" x 2" reducing elbow connects different pipe sizes
  • Galvanised steel construction resists corrosion in wet environments
  • 90° angle redirects flow efficiently in tight spaces
  • Female NPT threads on both ends simplify installation
  • California Proposition 65 warning indicates chemical hazard awareness

Galvanised 90° Reducing Elbow

The Legend Valve 352-135 is a galvanised reducing elbow designed for plumbing installations that require a 90-degree change in direction. It connects a 3-inch female thread to a 2-inch female thread, making it suitable for residential and light commercial pipework. The fitting is supplied new and meets the material specifications for standard water distribution systems.

Threaded FNPT Connection Limits

The elbow uses FNPT threads on both ends, so sealing relies on thread engagement and appropriate sealant. Galvanised steel resists corrosion in typical potable-water service but is not intended for aggressive chemical exposure or continuous high-temperature steam lines. Installers must observe local codes for pressure testing and thread-sealing methods.

3-Inch to 2-Inch Flow Transition

The 3-inch to 2-inch reduction handles the flow transition at the junction, providing adequate capacity for branch connections in bathware supply networks. Headroom diminishes if the downstream 2-inch line feeds multiple high-demand fixtures simultaneously, so system designers should verify velocity and pressure drop against the project requirements.

Highlights

  • 3" x 2" reducing elbow connects different pipe sizes
  • Galvanised steel construction resists corrosion in wet environments
  • 90° angle redirects flow efficiently in tight spaces
  • Female NPT threads on both ends simplify installation
  • California Proposition 65 warning indicates chemical hazard awareness

Specifications

BrandLEGEND VALVE
ColorTransparent
Size3" x 2"
TypePipes, Valves & Fittings

Questions about this item

Should I choose the 3" x 2" reducing elbow or a different size for my bathware installation?

The 3" x 2" galvanized reducing elbow is the only size offered for this Legend Valve bathware fitting, so select it when your pipe run steps from three-inch to two-inch FNPT threads.

What does the 90° angle mean once the elbow is installed in a real piping system?

The 90° bend redirects flow at a right angle between the 3" and 2" FNPT ports, letting you change direction while reducing pipe diameter in a single galvanized fitting.

What does the FNPT x FNPT interface cap in practice for this galvanized elbow?

Both ends use female National Pipe Taper threads, so the joint seals when mated with matching male NPT nipples or adapters and limits the connection to threaded galvanized pipe components.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.