We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized 90-degree reducing elbow, silver threaded finish

Legend Valve

Legend Valve 352-126 2" x 1-1/2" galvanized reducing elbow bathware

SKU CH-2CR5-V4BE4

A galvanised 90° reducing elbow with FNPT connections joins 2" and 1-1/2" pipework in bath installations

  • ColorTransparent
  • Size2" x 1-1/2"
  • TypePipes, Valves & Fittings
  • Connects 2" and 1-1/2" pipes efficiently
  • Galvanized steel resists corrosion for long service life
  • 90° reducing elbow redirects flow in tight spaces
  • FNPT threads on both ends simplify installation
  • California Proposition 65 warning indicates chemical hazards

Galvanized Reducing Elbow 352-126

This new Legend Valve fitting joins a 2-inch female NPT thread to a 1-1/2-inch female NPT thread in a 90-degree sweep. The galvanized coating protects the steel body against corrosion in water supply and drainage systems. It is supplied as a single component ready for thread sealant or tape.

Installers changing pipe diameter at a corner

Plumbers and maintenance teams use this elbow when a system must step down from two-inch to one-and-a-half-inch pipe at a right angle. It does not suit applications that require a straight coupling, a tee, or a connection between pipes of the same nominal size. Buyers needing other angles or end types should select a different fitting.

2" x 1-1/2" FNPT x FNPT 90° size

The reducing elbow carries the exact nominal dimensions 2-inch by 1-1/2-inch with female National Pipe Taper threads on both ends and a 90-degree bend. That combination of size, thread form and angle determines whether the part matches the piping plan..verify the specification before ordering.

Highlights

  • Connects 2" and 1-1/2" pipes efficiently
  • Galvanized steel resists corrosion for long service life
  • 90° reducing elbow redirects flow in tight spaces
  • FNPT threads on both ends simplify installation
  • California Proposition 65 warning indicates chemical hazards

Specifications

BrandLEGEND VALVE
ColorTransparent
Size2" x 1-1/2"
TypePipes, Valves & Fittings

Questions about this item

What is the maximum operating temperature before the galvanized coating degrades?

The fitting is rated for standard plumbing temperatures; the galvanized finish handles typical hot-water service without coating breakdown.

How much noise or vibration does the elbow transmit when water runs continuously?

As a passive 90-degree reducing elbow with FNPT threads, it adds no mechanical noise; any sound comes from flow velocity in the piping.

Which thread sealant or tape is required for the FNPT connections?

Use PTFE tape or pipe dope approved for potable water on the 2-inch and 1-1/2-inch FNPT threads to ensure a leak-free joint.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.