We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized 90-degree reducing elbow with female threads

Legend Valve

Legend Valve 352-124 2" x 1" Galvanized Reducing Elbow bathware

SKU CH-P2FE-G49W4

A galvanised 90° reducing elbow with 2" x 1" FNPT threads for pipe direction changes

  • ColorTransparent
  • Size2" x 1"
  • TypePipes, Valves & Fittings
  • Galvanised construction resists corrosion for long service life
  • 90-degree reducing elbow connects 2-inch and 1-inch pipe runs
  • Female NPT threads on both ends allow direct assembly
  • California Proposition 65 warning lists cancer and reproductive-harm risks
  • New condition ensures full factory specification and clean threads

2" x 1" Galvanized Reducing Elbow

The Legend Valve 352-124 is a 90-degree reducing elbow designed to join a 2-inch female NPT thread to a 1-inch female NPT thread. It suits plumbers and maintenance crews routing galvanised pipework in water or gas systems where a directional change and size reduction are required at a single junction.

Galvanised NPT thread limits

The fitting relies on tapered National Pipe Thread engagement sealed with thread compound or tape. Galvanised coating resists corrosion in cold-water service but is not rated for potable-water systems where lead-free certification is mandated. Thread sealant compatibility and proper tightening torque determine the practical pressure ceiling.

Capacity and headroom

The 2-inch to 1-inch step-down handles typical residential branch take-offs and equipment connections without restricting flow unduly. It runs out of headroom when system pressure exceeds the fitting's rated class or when vibration and thermal cycling demand a welded or flanged joint instead of threaded engagement.

Highlights

  • Galvanised construction resists corrosion for long service life
  • 90-degree reducing elbow connects 2-inch and 1-inch pipe runs
  • Female NPT threads on both ends allow direct assembly
  • California Proposition 65 warning lists cancer and reproductive-harm risks
  • New condition ensures full factory specification and clean threads

Specifications

BrandLEGEND VALVE
ColorTransparent
Size2" x 1"
TypePipes, Valves & Fittings

Questions about this item

Should I pick the 352-124 or a different size for my pipe run?

The 352-124 is a 2" x 1" galvanized 90° reducing elbow with FNPT threads on both ends. Choose it when you need to step down from a two-inch line to a one-inch line at a right angle.

What does the 90° angle mean once the elbow is installed?

It turns the flow through a right angle, letting you change direction in tight spaces while reducing the pipe diameter from two inches to one inch in a single fitting.

How does the FNPT thread standard limit what I can connect?

Both ends use Female National Pipe Taper threads, so you must screw male NPT nipples or adapters into each side; the taper seal means no separate gasket is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.