Legend Valve
Legend Valve 201-440 S-602 EZ PVC Ball Valve 3
A 3-inch PVC ball valve for fluid control in air compressor and vacuum pump systems
- 3-inch EZ PVC ball valve simplifies flow control
- Legend Valve brand ensures reliable construction
- S-602 model designed for air compressor systems
- Model 201-440 identifies exact replacement part
- Proposition 65 notice discloses regulated chemical content
Valve Type and Application
The Legend Valve 201-440 is a 3-inch S-602 EZ PVC ball valve designed for use with air compressors and vacuum pumps. It provides a straightforward shut-off mechanism for fluid or gas lines in workshop or industrial settings. The valve body is constructed from PVC for chemical compatibility and corrosion resistance.
Installer Fit and Limitations
This valve suits technicians assembling or servicing compressed-air systems who need a simple quarter-turn isolation point. It is not intended for installers who require metal-bodied valves for higher temperature or pressure ratings, nor for systems needing automated actuation or specialised end connections beyond the standard PVC configuration.
Proposition 65 Notice
The product carries a California Proposition 65 warning indicating it contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Buyers handling or installing the valve should review the manufacturer’s safety data sheet and follow appropriate protective measures during use.
Highlights
- 3-inch EZ PVC ball valve simplifies flow control
- Legend Valve brand ensures reliable construction
- S-602 model designed for air compressor systems
- Model 201-440 identifies exact replacement part
- Proposition 65 notice discloses regulated chemical content
Specifications
| Brand | LEGEND VALVE |
|---|
Questions about this item
How much heat or noise does the Legend Valve 201-440 generate when installed in a pressurised air line?
The valve body is passive PVC with no moving electrical parts, so it adds no heat and makes no noise beyond normal fluid turbulence.
What existing piping must I already have to connect the 201-440 S-602 valve?
You need 3 inch nominal PVC pipe and compatible solvent-weld fittings to join the valve sockets into the line.
Will the 602 series ball valve work alongside older metal valves already in my compressed-air system?
Yes, the PVC body can be joined to metal threads using appropriate transition adapters rated for the same pressure class.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
