Leelbox
Leelbox 65W USB-C Car Charger Dual Port PD QC Zinc Alloy
Dual-port car charger delivers up to 65W via USB-C PD or USB-A QC, charging iPhone 16 to 80% in 15 minutes with a zinc-alloy body that stays cool
- TypeAutomobile Chargers
- Fast charge iPhone 16 to 80 % in 15 minutes with PD 65 W
- Reach 60 % iPad charge in 15 minutes using PD 65 W
- PPS super fast charging for Galaxy S24, S23, S22, S21, S20
- Zinc alloy shell improves heat dissipation by about 15 % and will not melt
- Compact thumb-sized body sits almost flush with the cigarette lighter
65W Dual-Port Car Charger
The Leelbox 65W USB-C car charger fits a standard 12V cigarette lighter socket and provides one USB-C and one USB-A port. It is aimed at drivers who need fast charging for phones and tablets while on the road. The zinc alloy body dissipates heat more effectively than plastic housings. A compact, near-flush design keeps the cabin tidy.
Replacing Slower Single-Port Adapters
This unit replaces older chargers limited to lower wattage or a single port. The jump is worth it when you regularly charge a modern phone such as an iPhone 13 through 16 or a Galaxy S20 through S25 and want up to 80 percent charge in 15 minutes. Note that the 65W maximum is not available on both ports simultaneously.
Check Your Cable and Device Compatibility
Before ordering, confirm your cables support the required Power Delivery or Quick Charge standards for the speeds advertised. Verify your phone or tablet accepts PD or PPS fast charging to reach the claimed percentages. The charger draws power from a standard 12V vehicle outlet.
Highlights
- Fast charge iPhone 16 to 80 % in 15 minutes with PD 65 W
- Reach 60 % iPad charge in 15 minutes using PD 65 W
- PPS super fast charging for Galaxy S24, S23, S22, S21, S20
- Zinc alloy shell improves heat dissipation by about 15 % and will not melt
- Compact thumb-sized body sits almost flush with the cigarette lighter
Specifications
| Type | Automobile Chargers |
|---|
Questions about this item
Does the 65W USB-C car charger fit a standard 12V cigarette lighter socket?
Yes, the thumb-sized zinc-alloy body is designed to sit almost flush with a 12V cigarette lighter outlet.
How do I install the dual-port charger and what is the common mistake?
Push the charger firmly into the 12V socket until it seats flush; the mistake is leaving it slightly loose, which breaks the power connection.
When should the zinc-alloy car charger be replaced?
Replace it if the metal body becomes deformed, the ports feel loose, or charging no longer reaches the rated 65W output.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



