LED Updates
LED Updates 20ft Red Storefront LED Light 5630 12V IP65 40pcs
A 20 ft red storefront LED kit with 40 IP65 modules, 12 V operation and a UL-listed power supply
- TypeLED Lighting
- Average Life40,000
- CRI70
- Lamp ShapeRectangle
- Fixture Typestorefront
- Bright red glow from 5630 SMD LEDs
- 20 ft coverage with 40 pre-taped modules
- 12 V DC input with UL listed power supply
- IP65 rating resists dust and water jets
- 40,000-hour average life reduces replacement frequency
20ft Red Storefront LED Kit
The kit provides 20 feet of red LED illumination built from 40 individual 5630 SMD modules. It is designed for storefront windows and similar display applications where a consistent red glow is required. Each module carries a self-adhesive backing for direct mounting on clean surfaces.
IP65 rating and 12V DC operation
The PVC housing meets IP65 waterproof grade, allowing the lights to withstand dust and water jets in normal outdoor use. Power comes from an included UL-listed 12V 3A supply, and the 120-degree beam angle spreads light evenly across the installation. Average life is rated at 40,000 hours with a CRI of 70.
Extendable length with larger supply
Modules can be linked to increase total brightness and length, though a higher-capacity power supply becomes necessary when adding segments. Wires may be cut to fit specific layouts without damaging the remaining sections. The product suits fixed installations rather than portable or battery-powered setups.
Highlights
- Bright red glow from 5630 SMD LEDs
- 20 ft coverage with 40 pre-taped modules
- 12 V DC input with UL listed power supply
- IP65 rating resists dust and water jets
- 40,000-hour average life reduces replacement frequency
Specifications
| Type | LED Lighting |
|---|---|
| Average Life | 40,000 |
| CRI | 70 |
| Lamp Shape | Rectangle |
| Fixture Type | storefront |
Questions about this item
How do I install the 5630 SMD LED modules on a storefront window?
Peel the self-stick tape on the back of each module and press firmly onto a clean, dry surface; the step people miss is removing all dust and grease first so the adhesive bonds properly.
What part will need replacement first on this 12V DC IP65 kit?
The UL Listed 12V 3A power supply typically fails before the 40,000-hour LED modules, so keep a spare 12V DC supply on hand for quick swap-out.
At what point does voltage drop limit the length of a continuous 5630 SMD run?
On a single 12V 3A supply the practical limit is the included 20ft / 40-module string; adding more modules requires a larger power supply to avoid dimming at the far end.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
GE Lighting 28885 T8 Linear Fluorescent Light Bulb 24 inch 17W 5000K Coverguard 6 pack
GE 61362 Fluorescent T5 46 inch 54W 5000K G5 base accessory
- Fluorescent Tube



