We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Round dimmable LED driver 12v 30w 2.5A AC 100v-130v to DC Class 2 Triac ETL Listed

LED Updates

LED Updates 12v 30w 2.5A Dimmable LED Driver

SKU CH-6Y3Q-P513C

A dimmable 12 V 30 W LED driver with 2.5 A output, Triac dimming compatible with Lutron and Leviton, ETL-listed Class 2, fits a 4" junction box and runs without buzzing or minimum load

  • Typedimmable LED driver
  • Dimmable with standard wall dimmers using Triac technology
  • 30 W output powers LED strips and modules reliably
  • ETL Class 2 listing confirms safety compliance
  • Fits inside a 4 inch junction box for code-compliant installs
  • Operates silently with no minimum load requirement

LED Driver 12v 30w Dimmable

This round-shape dimmable LED driver converts 100-130v AC to 12v DC at 2.5A and 30W. It carries ETL Class 2 listing and works with Triac wall dimmers from brands such as Lutron and Leviton. The unit fits inside a 4-inch junction box and ships with a removable 1ft AC wire for flexible installation. No minimum load is required and it operates without audible buzzing.

Suits Triac dimming projects.

Installers running LED strip, module, puck or showcase lights on standard leading-edge or trailing-edge Triac dimmers will find this driver compatible. It is not suitable for installations that require 0-10v, DALI, PWM or smart-home dimming protocols. The AC input range is limited to 100-130v, so projects on higher-voltage mains cannot use this unit. Buyers needing a different output voltage or a non-dimmable supply should select another product.

12v 2.5A 30W Triac dimmable output

The single specification that decides fit is the 12v 2.5A 30W Triac dimmable output with ETL Class 2 rating. Match this voltage, current and dimming method to the light load and the wall dimmer being used; if the load demands a different voltage, a non-Triac control scheme or a higher input voltage, this driver will not work.

Highlights

  • Dimmable with standard wall dimmers using Triac technology
  • 30 W output powers LED strips and modules reliably
  • ETL Class 2 listing confirms safety compliance
  • Fits inside a 4 inch junction box for code-compliant installs
  • Operates silently with no minimum load requirement

Specifications

Typedimmable LED driver

Questions about this item

Will the driver itself need replacing if the LED strip fails?

The driver is a separate 12 V 30 W unit; only the strip would need replacement unless the driver is damaged.

What limits continuous output before the driver shuts down?

The 2.5 A / 30 W rating is the sustained limit; exceeding it triggers the built-in protection.

Does the driver produce audible noise or noticeable heat during all-day operation?

The supplier states no buzzing or humming and Class 2 operation keeps surface temperatures low.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.