LCDOLED
LCDOLED 2 in 1 accessory Dell Inspiron 14 5410 P147G 14.0 1920x1080 IPS 40Pin
Replacement 14.0-inch Full HD IPS touch display assembly with 40-pin connector for Dell Inspiron 14 5410 2-in-1 models
- Full HD clarity on a 14.0 inch IPS panel
- Touch digitizer assembly ready for Dell Inspiron 14 5410 2-in-1
- 40-pin EDP connector matches P147G model exactly
- Bezel and touch control board included for direct swap
- Compatible with 1366 x 768 resolution as alternative
Compatible Dell Inspiron 14 5410 2-in-1
This replacement display assembly fits the Dell Inspiron 14 5410 2-in-1 models P147G and P147G002. It provides a 14.0 inch Full HD 1920x1080 IPS LED LCD panel with a 40 pin EDP connector. The kit includes the screen, touch digitizer, bezel and touch control board. It does not support active pen or stylus input.
Sustained operation with touch input
The IPS panel maintains consistent colour and viewing angles during extended sessions. Touch response remains stable across the digitizer surface because the integrated controller board is matched to the 40 pin interface. No active pen support means palm rejection relies on the original firmware. The assembly is tested before shipping to verify steady performance.
Thermals noise and power in normal use
LED backlighting keeps heat output low during typical workloads. The display draws power through the laptop's existing 40 pin EDP connection without additional cables. No moving parts produce noise. Installers must reuse the original LCD cable, hinges and back cover to preserve the designed thermal path. Professional fitting is recommended.
Highlights
- Full HD clarity on a 14.0 inch IPS panel
- Touch digitizer assembly ready for Dell Inspiron 14 5410 2-in-1
- 40-pin EDP connector matches P147G model exactly
- Bezel and touch control board included for direct swap
- Compatible with 1366 x 768 resolution as alternative
Specifications
No published specifications for this item yet.
Questions about this item
Does the 40-pin EDP connector on this 14.0-inch FullHD IPS assembly draw more power or run hotter than the original screen?
The replacement uses the same 40-pin EDP interface and LED backlight as the factory panel, so power draw and heat output remain equivalent to the original Dell Inspiron 14 5410 display.
Which original parts must I keep to install this LCD screen, touch digitizer, bezel and touch control board?
You must reuse your existing LCD cable, gravity sensor, back cover, hinges, webcam and any mounting hardware; the package supplies only the screen, digitizer, bezel and touch control board.
Will this 1920x1080 IPS panel work with the 1366x768 graphics output on an older Dell Inspiron 14 5410 motherboard?
Yes, the supplier notes the 1920x1080 IPS assembly is compatible with 1366x768 systems, so the lower-resolution motherboard can drive the higher-resolution panel.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
