We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
LCDBros NT173WDM-N23 V8.0 matte replacement screen 1600x900 30 pins

LCDBros

LCDBros Replacement Screen NT173WDM-N23 V8.0 30 Pins 1600x900 Matte

SKU CH-FY2F-08WBR

A 1600x900 matte replacement panel with a 30-pin connector for the exact NT173WDM-N23 V8.0 model

  • TypeReplacement Screen
  • Exact fit for NT173WDM-N23 V8.0 models
  • 1600×900 HD+ resolution matches original spec
  • Matte finish reduces glare in bright rooms
  • 30-pin connector aligns with factory cable
  • Brand new LCDBros panel, 100 % compatible

Exact Model Match Required

This LCDBros replacement screen carries the part number NT173WDM-N23 V8.0. It presents a 1600x900 HD+ resolution with a matte surface. The panel connects through a 30-pin interface.

For Repair Technicians and DIY Owners

The part suits anyone replacing a damaged panel in a device that specifies this exact model. Buyers who cannot confirm the model, resolution, backlight type and connector on their original screen should not purchase.

30-Pin Connector Decides Fit

The 30-pin connector is the single specification that determines whether this panel will install and function. Verify the original screen uses the same pin count before ordering.

Highlights

  • Exact fit for NT173WDM-N23 V8.0 models
  • 1600×900 HD+ resolution matches original spec
  • Matte finish reduces glare in bright rooms
  • 30-pin connector aligns with factory cable
  • Brand new LCDBros panel, 100 % compatible

Specifications

BrandLCDBros
ModelNT173WDM-N23 V8.0
TypeReplacement Screen

Questions about this item

How do I install the NT173WDM-N23 V8.0 30-pin replacement screen, and what step causes the most returns?

Disconnect power and battery, remove the bezel, unplug the old 30-pin cable, fit the new panel, reconnect the cable firmly, then test before reassembling; the step most often missed is reseating the 30-pin connector fully on both ends.

What maintenance or replacement will the NT173WDM-N23 V8.0 panel need over time?

No scheduled maintenance is required; if backlight brightness fades or the matte coating is damaged, the entire panel would need replacement.

What limit appears first on the NT173WDM-N23 V8.0 during sustained use?

The 1600x900 resolution and 30-pin interface set the hard ceiling; extended operation is bounded by the panel's native refresh timing and backlight consistency.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.