We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Glossy 14-inch replacement LCD panel with 30-pin connector

LCDBros

LCDBros Replacement Screen HP Pavilion 14-BK061ST 30 Pins 1366x768 Glossy monitor accessory

SKU CH-FDD1-EJVF1

Replacement screen for HP Pavilion 14-BK061ST with 30-pin connector and 1366x768 glossy display

  • TypeReplacement Screen
  • ColorGlossy
  • Exact fit for HP Pavilion 14-BK061ST
  • 1366 x 768 HD resolution matches original spec
  • 30-pin connector ensures direct plug-in
  • Glossy finish restores factory look
  • Includes tools for straightforward installation

Direct replacement for HP Pavilion 14-BK061ST

This new LCDBros panel is built to match the exact specifications of the HP Pavilion 14-BK061ST laptop display. It features a 1366x768 resolution with a glossy surface finish and a 30-pin connector. The kit includes tools to assist with the installation process. Buyers who need a different resolution, pin count, or matte finish cannot use this part.

Passive component with no active thermals

As a passive display panel, this screen generates no operational noise and draws no independent power beyond the laptop's native display circuitry. Thermal characteristics are governed entirely by the host device's cooling system and backlight implementation. There are no fans, pumps, or active cooling elements to consider. Installers who expect active thermal management or external power requirements will find none.

30-pin eDP interface and 1366x768 resolution

The single specification that determines compatibility is the 30-pin connector paired with the 1366x768 native resolution. Your existing screen must match both exactly; a different pin layout or pixel count will prevent the panel from functioning. The supplier guarantees 100 percent compatibility when these parameters align. Systems requiring a 40-pin connection or higher resolution panel are not supported.

Highlights

  • Exact fit for HP Pavilion 14-BK061ST
  • 1366 x 768 HD resolution matches original spec
  • 30-pin connector ensures direct plug-in
  • Glossy finish restores factory look
  • Includes tools for straightforward installation

Specifications

BrandLCDBros
ModelHP PAVILION 14-BK061ST
TypeReplacement Screen
ColorGlossy

Questions about this item

How do I install the 30-pin connector on this 14-inch 1366x768 glossy panel without damaging the ribbon?

Power off the laptop and disconnect the battery. Route the 30-pin ribbon through the hinge channel, align the connector squarely, and press evenly until it clicks; forcing it at an angle bends pins and causes lines on the 1366x768 display.

What maintenance or replacement will this HP Pavilion 14-BK061ST screen need later?

The LED backlight on this glossy 1366x768 panel gradually dims after years of use; when brightness at 100 % setting becomes insufficient, the entire screen assembly must be swapped again.

What limit appears first during sustained use of this 1366x768 glossy replacement?

Surface glare on the glossy coating becomes the limiting factor in bright rooms, washing out the 1366x768 image before the LED backlight or 30-pin interface shows any degradation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.