We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

LCDBros

LCDBros Replacement Screen HP 17-BS058CL 30 Pins 1600x900 Glossy

SKU CH-MP1S-DCXXA

Replacement screen for HP 17-BS058CL with 30-pin connector, 1600x900 HD+ resolution and glossy finish

  • TypeReplacement Screen
  • Exact fit for HP 17-BS058CL with 30-pin connector
  • Sharp 1600x900 HD+ resolution for clear detail
  • Glossy finish enhances colour depth and contrast
  • Brand-new panel ready for immediate installation
  • 100% compatible replacement matched to your model

Exact HP 17-BS058CL match

This LCDBros replacement screen is built for the HP 17-BS058CL laptop and uses a 30-pin connector. Buyers must verify their current panel has a 1600x900 resolution and glossy finish before ordering. A different resolution or backlight type will not function in the system.

Thermals noise and power

The panel draws power directly from the laptop’s internal display cable and adds no separate cooling or noise. Normal operation stays within the original device’s thermal envelope without extra load.

100 percent compatible supply

You receive a 100 percent compatible screen whose exact brand and part number depend on market availability. No drivers, software or mounting hardware are bundled with the panel.

Highlights

  • Exact fit for HP 17-BS058CL with 30-pin connector
  • Sharp 1600x900 HD+ resolution for clear detail
  • Glossy finish enhances colour depth and contrast
  • Brand-new panel ready for immediate installation
  • 100% compatible replacement matched to your model

Specifications

BrandLCDBros
ModelHP 17-BS058CL
TypeReplacement Screen

Questions about this item

How do I install the 30-pin connector on the HP 17-BS058CL replacement screen without damaging the pins?

Align the 30-pin cable squarely with the socket, press straight in until fully seated, then secure the retaining latch; the most common error is forcing the connector at an angle, which bends the delicate pins.

What part of the HP 17-BS058CL replacement screen is most likely to need replacement after extended use?

The CCFL backlight lamp and its inverter circuit typically degrade first, causing dimming or flicker; the 1600x900 panel itself rarely fails unless physically damaged.

At what point does the glossy 1600x900 panel show its limit during continuous operation?

Prolonged maximum-brightness use accelerates CCFL aging, so the first sustained-use limit is gradual brightness loss and colour shift rather than a hard thermal shutdown.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.