We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

LCDBros

LCDBros Replacement Screen for HP 17-AK015DS 30 Pins HD+ 1600x900 Glossy monitor accessory

SKU CH-3X58-B8WK3

A 1600x900 glossy replacement panel with a 30-pin connector for HP 17-AK015DS laptops

  • TypeReplacement Screen
  • Exact fit for HP 17-AK015DS 30-pin connector
  • HD+ 1600x900 resolution restores original clarity
  • Glossy finish matches factory screen appearance
  • 100% compatible panel guaranteed by supplier verification
  • Brand-new condition ensures zero prior wear

Direct Replacement for HP 17-AK015DS

This LCDBros replacement screen is built for the HP 17-AK015DS notebook. It uses a 30-pin connector and provides a 1600x900 HD+ resolution with a glossy surface. The part is supplied new and matches the original specification.

Buyers who must match every spec exactly

The screen will only work if the resolution, backlight type and physical size match the panel currently installed. Builders who cannot confirm those three details should not order this part. A mismatched panel will not function in the system.

30-pin connector and 1600x900 resolution

Compatibility hinges on the 30-pin interface and the 1600x900 pixel count. If the original screen uses a different pin count or resolution, this unit will not fit or display correctly. Verify both numbers before purchase.

Highlights

  • Exact fit for HP 17-AK015DS 30-pin connector
  • HD+ 1600x900 resolution restores original clarity
  • Glossy finish matches factory screen appearance
  • 100% compatible panel guaranteed by supplier verification
  • Brand-new condition ensures zero prior wear

Specifications

BrandLCDBros
ModelHP 17-AK015DS
TypeReplacement Screen

Questions about this item

Does the 30-pin connector match the HP 17-AK015DS motherboard header?

The 30-pin connector is built for the HP 17-AK015DS header. Align the pins carefully before pressing the ribbon in; forcing it bent pins is the common mistake.

What tools and steps are needed to swap the panel?

Remove the bezel screws, disconnect the old 30-pin ribbon, connect the new panel, then reseat the bezel. The step most people skip is testing the display before snapping the bezel back.

Will the HD+ 1600x900 glossy surface need a replacement polariser or backlight later?

The panel ships with a fresh backlight and polariser; no separate polariser change is expected. If brightness fades years later, the whole panel is replaced rather than servicing the backlight alone.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.