Laser Tek Services
Laser Tek Services 4PK Toner Refill for Konica Minolta 7450 7500 7550
Four-pack toner refill kit with chips for Konica Minolta 7450, 7500 and 7550 printers
- Cartridge QuantityFour Pack
- Compatible ProductsKonica Minolta 7450
- Coverage5%
- Refill cartridges up to three times for lower running costs
- Four-pack kit covers Konica Minolta 7450, 7500 and 7550 models
- Includes chips matched to OEM numbers 8938-629, 8938-630, 8938-631, 8938-632
- 5 % coverage rating supports consistent page yields
- New aftermarket toner refills from Laser Tek Services
Laser Tek Services 4PK Toner Refill Kit
This four-pack toner refill kit is built for Konica Minolta 7450, 7500 and 7550 series printers. It includes replacement chips so the printer recognises each cartridge after refilling. The kit suits offices that print high volumes and want to keep running costs low.
Replaces Original Cartridges 8938-629 630 631 632
The refill replaces OEM cartridges 8938-629, 8938-630, 8938-631 and 8938-632. It is worth the switch when you are ready to recycle each cartridge up to three times and accept a 5% coverage rating. Buyers who need a higher page yield per fill or a different printer series should look elsewhere.
Refill With Included Chips
Each bottle lets you refill an empty cartridge and snap on the supplied chip for immediate recognition. The process is straightforward: open the cartridge, pour toner, seal it and fit the new chip. The most common issue is toner spillage if the fill hole is not sealed properly before shaking.
Highlights
- Refill cartridges up to three times for lower running costs
- Four-pack kit covers Konica Minolta 7450, 7500 and 7550 models
- Includes chips matched to OEM numbers 8938-629, 8938-630, 8938-631, 8938-632
- 5 % coverage rating supports consistent page yields
- New aftermarket toner refills from Laser Tek Services
Specifications
| Brand | Laser Tek Services |
|---|---|
| Cartridge Quantity | Four Pack |
| Compatible Products | Konica Minolta 7450 |
| Coverage | 5% |
Questions about this item
Will this refill kit fit the original Konica Minolta 8938-629 cartridge housing?
Yes, the kit includes chips for the 8938-629, 8938-632, 8938-631 and 8938-630 cartridges used in the Konica Minolta 7450, 7500 and 7550 series.
What is the correct way to install the replacement chips so the printer recognises them?
Remove the old chip from the used cartridge, snap the new chip into the same slot, then reinstall the cartridge; the printer will not register the refill if the chip stays on the old unit.
How many times can I refill the same cartridge before print quality drops?
The supplier states each cartridge can be recycled and reused up to three times while maintaining high-quality prints at 5% coverage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



