LANDTEK
LANDTEK CM-8829 Paint Coating Thickness Gauge 0-1250 µm / 0-50 Mil electrician tool
Measures paint or coating thickness from 0 to 1250 µm using magnetic induction and eddy current probes with USB, RS-232 or Bluetooth data output
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Measures paint up to 1250 µm or 50 mil on metal surfaces
- Dual magnetic-induction and eddy-current probes handle ferrous and non-ferrous substrates
- Single and continuous modes suit flat, curved or tiny workpieces
- USB, RS-232 and optional Bluetooth send readings straight to a PC
- One-button operation with audible beep makes checks fast and simple
Automotive coating gauge for electricians
The LANDTEK CM-8829 measures paint or coating thickness from 0 to 1250 µm or 0 to 50 mil on metal substrates. It uses magnetic induction for ferrous bases and eddy current for non-ferrous metals. The tool suits automotive inspectors, body-shop technicians and electricians who verify protective finishes on panels or enclosures.
Dual probe modes with data output
Two measurement modes cover single spot checks and continuous scanning for curved or small parts. The gauge auto-detects the substrate, stores calibration values and beeps in single mode only. Data transfers via USB, RS-232 or optional Bluetooth to a PC for reporting. Metric and imperial units are selectable on the fly.
Verify substrate and range needs
Confirm the base metal is either magnetic or non-magnetic conductive material; the gauge cannot measure on non-metallic substrates. Ensure the expected coating thickness falls within the 1250 µm or 50 mil span. Check that your PC or logging software accepts USB or RS-232 input if digital records are required.
Highlights
- Measures paint up to 1250 µm or 50 mil on metal surfaces
- Dual magnetic-induction and eddy-current probes handle ferrous and non-ferrous substrates
- Single and continuous modes suit flat, curved or tiny workpieces
- USB, RS-232 and optional Bluetooth send readings straight to a PC
- One-button operation with audible beep makes checks fast and simple
Specifications
| Brand | LANDTEK |
|---|---|
| Model | CM-8829 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Will the probe on the CM-8829 need replacement after extended use?
The gauge uses separate F and N probes for magnetic induction and eddy current measurement; probes are replaceable if damaged or worn.
What is the maximum coating thickness the CM-8829 can measure before reaching its limit?
The measurement range tops out at 1250 µm or 50 mil, so coatings thicker than that cannot be read.
Does the CM-8829 produce any audible alert during continuous measurement?
A buzzer sounds during single measurements but stays silent in continuous mode.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
