Lamotte
Lamotte 3000HR Peracetic Acid Test Strip 0 to 1000 ppm 50 Tests
Test strips measure peracetic acid from 0 to 1000 ppm with 50 tests per pack
- Measures peracetic acid from 0 to 1000 ppm
- 50 test strips per pack for repeated use
- Ready-to-use strips with included colour chart
- Compact 3-inch strips fit tight sample vessels
- Lamotte laboratory-grade reagent for reliable results
Peracetic acid detection range
Lamotte 3000HR test strips measure peracetic acid from 0 to 1000 ppm. Each pack contains 50 strips for repeated monitoring. A colour chart label is included for direct visual comparison. The strips are 3 inches long and a quarter inch wide.
Suitable applications and limitations
These strips suit operators who need a quick, portable check of peracetic acid levels in water treatment, food processing or sanitation. They are not intended for users who require laboratory-grade titration accuracy or automatic data logging. Buyers needing pH measurement or multi-parameter analysis should consider other methods.
Deciding specification
The single specification that decides suitability is the 0 to 1000 ppm peracetic acid range. If your process operates outside this window, the strips will not give a valid reading. Verify that your target concentration falls within these limits before purchasing.
Highlights
- Measures peracetic acid from 0 to 1000 ppm
- 50 test strips per pack for repeated use
- Ready-to-use strips with included colour chart
- Compact 3-inch strips fit tight sample vessels
- Lamotte laboratory-grade reagent for reliable results
Specifications
| Brand | LAMOTTE |
|---|
Questions about this item
How do I decide between the 0-1000 ppm range and a narrower peracetic acid strip?
This strip covers the full 0 to 1000 ppm range in one test, so you do not need a second strip for higher concentrations.
What does the 1000 ppm upper limit tell me when I am testing on site?
Any sample that turns the darkest colour block is at or above 1000 ppm, so you know immediately if the solution exceeds your target.
Does the colour chart label use a standard method that my regulator recognises?
The included colour chart label is calibrated for the 0 to 1000 ppm peracetic acid range and provides a direct visual match for each test.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
