We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of 3-foot TA3F to XLR male audio cables, black jacketed, coiled together

Laird Technologies

Laird Technologies 3-Pin Female Mini-XLR TA3F to 3-Pin XLR Male Cable for Sound Devices 744T Mixer, Pair

SKU CH-907Z-7KT6W

Pair of 3-foot cables linking a Sound Devices 744T mixer TA3F input to standard XLR male outputs

  • Pristine sound quality from high-grade construction ensuring optimal signal transfer
  • Secure connection between Sound Devices 744T Mixer and XLR equipment
  • Robust connectors and sturdy build withstand demanding professional use
  • Three-foot length reduces clutter while maintaining signal integrity
  • Pair of balanced interface cables compatible with TA3 and XLR inputs

Pair of TA3F to XLR cables for 744T

This pair of 3‑pin female mini‑XLR TA3F to standard 3‑pin XLR male cables is built for the Sound Devices 744T mixer. Each cable provides a balanced connection between the mixer’s TA3 inputs or outputs and conventional XLR equipment. The 3‑foot length keeps cable runs short and tidy in field or studio setups. Professional recordists and sound engineers get a direct, reliable link without adapters.

Passive balanced construction

The cables use passive balanced wiring with robust connectors that resist mechanical stress and maintain signal integrity. No active electronics are present, so there is no power draw, no heat generation and no added noise floor. Shielded construction rejects electromagnetic interference in live and location environments. Durable jackets and strain reliefs survive repeated coiling and uncoiling.

Two cables extendable with standard mic cable

The package supplies two identical interface cables, matching the specification of the Sound Devices XL‑2. Each cable can be extended by connecting additional standard microphone cable when longer runs are required. This modular approach lets users adapt to different stage or location layouts without replacing the dedicated TA3F ends. No software or configuration is involved.

Highlights

  • Pristine sound quality from high-grade construction ensuring optimal signal transfer
  • Secure connection between Sound Devices 744T Mixer and XLR equipment
  • Robust connectors and sturdy build withstand demanding professional use
  • Three-foot length reduces clutter while maintaining signal integrity
  • Pair of balanced interface cables compatible with TA3 and XLR inputs

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the TA3F end to the 744T mixer without damaging the pins?

Align the keyed mini-XLR plug with the mixer's recessed TA3 jack and push straight in until the latch clicks; forcing it at an angle bends the delicate pins.

What part of this cable pair is most likely to need replacement first?

The TA3F mini-XLR connector sees the most insertions and its smaller contacts wear faster than the full-size XLR male end.

What limits performance first during a long recording session with these cables?

The three-foot length keeps capacitance low, so the first practical limit is the mixer's own preamp noise floor rather than cable-induced signal loss.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.