We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black coaxial cable with BNC connectors on both ends, ten feet long

Laird Technologies

Laird 12GSDI-B-B Canare L-5.5CUHD 12G SDI coaxial rf cable 10 ft

SKU CH-7VQ7-XS8FB

Transmits 12G-SDI 4K UHD video over 10 ft with Canare L-5.5CUHD coax and BNC connectors, SMPTE ST-2082-1 compliant, 16 AWG conductor, -4 to 167 °F operating range

  • 4K UHD video over 12G-SDI with pristine signal integrity
  • 12G-SDI transmission certified to 250 feet without CRC errors
  • 16 AWG inner conductor and tinned copper braid for lasting reliability
  • Bend radius over 6× cable O.D. for easy routing in tight spaces
  • Operating range -4 °F to 167 °F suits demanding production environments

Professional 12G-SDI BNC cable for broadcast

This 10-foot coaxial cable uses Canare L-5.5CUHD construction with BCP-D55UHD BNC connectors to carry 12G-SDI 4K UHD signals. It is built for broadcast television, sports production, live events and commercial installation projects that require SMPTE ST-2082-1 compliance.

Straightforward BNC termination

The cable installs with standard BNC connectors and a minimum bend radius greater than six times the outer diameter, so routing through trays or around equipment racks is simple. The 16 AWG inner conductor and tinned copper braid resist fatigue, but the connector shells must be seated fully to maintain the certified return loss figures.

Ideal for fixed 12G, 6G

Facilities needing certified 250-foot 12G-SDI runs with 15 dB return loss at 12 GHz will benefit from this specification. It is not suited for applications requiring HDMI, DisplayPort or fibre-optic interfaces, nor for mobile rigs that demand ultra-lightweight or repeatedly coiled cable.

Highlights

  • 4K UHD video over 12G-SDI with pristine signal integrity
  • 12G-SDI transmission certified to 250 feet without CRC errors
  • 16 AWG inner conductor and tinned copper braid for lasting reliability
  • Bend radius over 6× cable O.D. for easy routing in tight spaces
  • Operating range -4 °F to 167 °F suits demanding production environments

Specifications

No published specifications for this item yet.

Questions about this item

How can I verify the 12G-SDI link is error-free after installing this 10 ft cable?

Connect the BNC ends to your 12G-SDI source and monitor, then check the receiver for zero CRC errors; Laird certifies this length for full 12G-SDI integrity per SMPTE ST-2082-1.

What connectors and cable type are supplied, and is anything else needed for a typical 4K UHD run?

The box contains a 10 ft Canare L-5.5CUHD coaxial cable terminated with BCP-D55UHD BNC plugs on both ends; no extra parts are required for a standard 12G-SDI connection.

Which cable variant should I choose for a 12G-SDI install needing maximum certified distance?

This 10 ft assembly uses the Canare L-5.5CUHD construction that Laird certifies for 12G-SDI up to 250 ft, so the same cable type in longer lengths will meet the maximum certified distance.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.