We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Zinc alloy pulling elbow, 3/4 inch threaded, PVC coated

L.H. DOTTIE

L.H. DOTTIE PE2 Rigid Pulling Elbow 3/4 in Threaded Zinc Alloy PVC Coated conduit

SKU CH-QX6K-YKGEH

A 3/4-inch threaded zinc-alloy pulling elbow with PVC coating for rigid conduit installations

  • TypeCable Management & Conduit
  • 3/4 in threaded hub connects rigid conduit securely
  • Zinc alloy body resists corrosion in damp locations
  • PVC coating protects cables from abrasion during pulls
  • Rigid pulling elbow simplifies wire routing around corners
  • DOTTIE brand trusted by electrical professionals

L.H. DOTTIE PE2 Rigid Pulling Elbow

The L.H. DOTTIE PE2 is a rigid pulling elbow designed for electrical conduit installations. It features a 3/4 inch threaded connection constructed from zinc alloy with a PVC coating. This component provides a durable junction point for pulling cables through rigid conduit systems.

Suited for electricians running threaded rigid

Installers requiring a coated, corrosion-resistant elbow for 3/4 inch rigid conduit will find this fitting appropriate. It is not intended for use with flexible conduit, non-threaded systems, or conduit sizes other than 3/4 inch. Buyers needing different diameters or uncoated fittings should look elsewhere.

3/4 inch threaded zinc alloy construction

The decisive specification is the 3/4 inch threaded size combined with a zinc alloy body and PVC coating. This determines compatibility with matching rigid conduit and resistance to environmental exposure. Verify the conduit type and diameter before purchase.

Highlights

  • 3/4 in threaded hub connects rigid conduit securely
  • Zinc alloy body resists corrosion in damp locations
  • PVC coating protects cables from abrasion during pulls
  • Rigid pulling elbow simplifies wire routing around corners
  • DOTTIE brand trusted by electrical professionals

Specifications

BrandDOTTIE
TypeCable Management & Conduit

Questions about this item

What conduit size and thread type must already be in place for the 3/4 in threaded pulling elbow to connect?

You need 3/4 inch rigid conduit with matching NPT threads so the elbow’s female ends screw on directly.

Can the zinc alloy PVC coated elbow stay in a run that still uses older galvanised steel conduit?

Yes, the 3/4 in NPT threads are the same standard used on legacy galvanised rigid, so it threads on without adapters.

After installation, how do I confirm the pulling elbow is seated correctly?

Both threaded ends should be fully engaged with no visible thread gaps, the PVC coating intact, and the elbow oriented so the removable cover faces the pull direction.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.