L.H. DOTTIE
L.H. DOTTIE HN34 Hex Nut 3/4"-10 Grade 2 Zinc Plated
Carbon steel hex nut with 3/4"-10 thread and zinc plating for corrosion resistance
- TypeNuts
- Grade 2 carbon steel delivers reliable clamping strength
- 3/4"-10 thread fits standard coarse-pitch bolts
- Zinc plating resists corrosion in damp environments
- 617 in height suits tight clearance assemblies
- DOTTIE brand trusted by trade professionals for hardware consistency
DOTTIE HN34 Hex Nut 3/4"-10 Grade 2
The DOTTIE HN34 is a carbon steel hex nut with a 3/4"-10 thread pitch and a height of .617 in. It features a zinc plated finish for corrosion resistance and meets Grade 2 strength specifications. This fastener suits general purpose assembly and maintenance tasks.
Suits mechanics and DIYers needing Grade 2 strength
This nut fits applications requiring standard Grade 2 holding power and a 3/4"-10 thread. It is not for buyers who need higher tensile strength grades or different thread pitches. Users requiring stainless steel or alternative plating should look at other options.
Fits 3/4"-10 bolts and threaded rod
The component pairs with matching 3/4"-10 bolts or studs in structural or automotive builds. The zinc coating frees the joint from immediate rust concerns in dry environments. No specialised tools beyond a standard wrench are required for installation.
Highlights
- Grade 2 carbon steel delivers reliable clamping strength
- 3/4"-10 thread fits standard coarse-pitch bolts
- Zinc plating resists corrosion in damp environments
- 617 in height suits tight clearance assemblies
- DOTTIE brand trusted by trade professionals for hardware consistency
Specifications
| Brand | DOTTIE |
|---|---|
| Type | Nuts |
Questions about this item
What bolt size and thread pitch must I already have to use this 3/4"-10 hex nut?
You need a bolt with a 3/4" diameter and 10 threads per inch so the nut engages correctly.
Will this Grade 2 zinc-plated nut gall or seize when paired with an older Grade 5 or Grade 8 bolt?
The softer Grade 2 nut will deform before the higher-grade bolt, reducing galling risk; zinc plating adds lubricity during initial tightening.
How can I confirm the nut is seated properly after installation?
Measure the installed height — it should be approximately 0.617 in — and verify the bolt threads protrude slightly past the nut face.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
