KZ ZS12 Pro 2 USB-C IEM 5BA+1DD 6 Driver 35 ohm 109 dB Dark Olive
In-ear monitors with six hybrid drivers and USB-C connector deliver detailed sound and deep bass for gaming and music
- TypeIn-Ear
- ColorDark Olive
- THDIn Ear
- Input Impedance35 ohms
- Signal to Noise Ratio(SNR)109 decibels
- Sensitivity109 decibels
- Hybrid 6-driver array reveals detailed sound layers
- 10 mm dynamic driver delivers deep bass impact
- Built-in electronic crossover ensures precise frequency division
- USB-C connector with inline mic enables clear chat
- 35 ohm impedance and 109 dB sensitivity suit portable sources
Hybrid 6-Driver IEM with USB-C DAC
The KZ ZS12 Pro 2 combines five balanced-armature drivers and one 10 mm dynamic driver per earpiece for a total of twelve transducers. A built-in electronic crossover board manages frequency division between the driver types. The USB-C connector carries a digital signal, so the cable includes its own DAC and amplifier. This makes the set a self-contained audio solution for portable devices that lack a 3.5 mm jack.
Check USB-C audio support and fit
Verify that your phone, tablet or laptop delivers digital audio over its USB-C port; some models route only analogue signals or require a specific protocol. The earpieces use a single-ear coupling design with the supplied silicone tips, so seal quality will depend on your ear-canal shape. The detachable cable terminates in a standard 2-pin connector, allowing replacement if the USB-C plug or inline microphone controls are damaged.
Sustained listening at 109 dB sensitivity
With a 35-ohm load and 109 dB sensitivity, the drivers reach high output levels from the modest voltage a USB-C DAC typically supplies. The dynamic driver handles bass extension while the balanced-armature array covers mid-high and ultra-high frequencies, keeping distortion low during long sessions. Passive sound isolation reduces the need to raise volume in noisy environments, helping maintain consistent performance over extended gaming or music playback.
Highlights
- Hybrid 6-driver array reveals detailed sound layers
- 10 mm dynamic driver delivers deep bass impact
- Built-in electronic crossover ensures precise frequency division
- USB-C connector with inline mic enables clear chat
- 35 ohm impedance and 109 dB sensitivity suit portable sources
Specifications
| Brand | KINYO |
|---|---|
| Model | zs12pro2, LIU9064, B2228 |
| Part Number | B2228 |
| Type | In-Ear |
| Color | Dark Olive |
| THD | In Ear |
| Input Impedance | 35 ohms |
| Signal to Noise Ratio(SNR) | 109 decibels |
| Sensitivity | 109 decibels |
| Connector | USB |
| Ear Coupling | Single Ear |
| Cord Length | User Manual |
| Noise Cancelling | sound_isolation |
| Wireless Type | IR |
| Microphone Impedance | ~3K ohm |
| Microphone Signal to Noise Ratio(SNR) | 109 decibels |
| Microphone Sensitivity | 109 decibels |
| Features | sound_isolation, Detachable, Media Control, touch, Wired, In Ear, hybrid_driver, 35 ohm, Cable |
| Package Contents | Cable, Eartip, User Manual |
Questions about this item
What comes in the box and does the USB-C cable need to be bought separately?
The package includes a detachable USB-C cable, a set of eartips and a user manual so nothing extra is required for basic use
The model lists several part numbers — B2228, LIU9064 and zs12pro2 — which one should I choose?
They all refer to the same KZ ZS12 Pro 2 hardware; B2228 is the part number printed on the box
The spec sheet shows 109 dB sensitivity and 35 ohm impedance — what does that mean for everyday listening?
The high sensitivity and moderate impedance let the IEMs reach loud volumes cleanly from a phone or laptop USB-C port without an external amplifier
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HQRP 2-Pack 10 ft 2.1mm x 5.5mm DC Power Extension Cable + Coaster
- Black



