We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal tilting adapter with two 5/8 inch studs and threaded mounts for lighting gear

Kupo

Kupo Tilting Umbrella Adapter with 5/8in Studs

SKU CH-DA40-SP72F

Tilting umbrella adapter with dual 5/8in receivers, ratcheted handle, set-screw shaft lock, and removable reversible studs offering 1/4"-20 and 3/8"-16 threads for mounting umbrellas, soft boxes.

  • TypeLighting
  • Tilting pivot enables precise umbrella positioning for controlled lighting effects
  • Ratcheted metal handle locks adapter securely for stable equipment support
  • Built-in set-screw hole locks umbrella shaft in place on fixtures without dedicated slots
  • Two reversible 5/8" studs with 1/4"-20 and 3/8"-16 threads expand mounting compatibility
  • Male and female thread options on included studs allow flexible attachment of diverse gear

Versatile Lighting Adapter

The Kupo Tilting Umbrella Adapter connects umbrellas, soft boxes, strobes and speedlites to light fixtures that lack a built-in umbrella shaft slot. Two 5/8" receivers join at a tilting pivot for precise angle control. A ratcheted metal handle locks the position securely for stable operation.

Thermals, Noise and Power

This mechanical adapter has no electrical components, so it generates no heat, draws no power and produces no noise during use. Operation stays completely silent and thermally neutral in any studio or location environment.

Sustained Load Behaviour

Under continuous session use the all-metal construction and ratcheted locking handle maintain the set angle without drift or slippage. The set-screw holds the umbrella shaft firmly, while removable KG000912 and KG001112 studs provide 1/4"-20 and 3/8"-16 threads for lasting accessory compatibility.

Highlights

  • Tilting pivot enables precise umbrella positioning for controlled lighting effects
  • Ratcheted metal handle locks adapter securely for stable equipment support
  • Built-in set-screw hole locks umbrella shaft in place on fixtures without dedicated slots
  • Two reversible 5/8" studs with 1/4"-20 and 3/8"-16 threads expand mounting compatibility
  • Male and female thread options on included studs allow flexible attachment of diverse gear

Specifications

TypeLighting

Questions about this item

How do I attach the Kupo Tilting Umbrella Adapter to my light stand using the 5/8in receivers?

Slide each 16 mm receiver onto the stand's 5/8in stud and tighten the ratcheted metal handle firmly so the pivot cannot rotate under the weight of an umbrella or softbox.

Which parts of the KG000912 and KG001112 studs might wear out and need replacement?

The 1/4"-20 and 3/8"-16 threads on both studs can strip if over-tightened; the set-screw that locks the umbrella shaft may also loosen over time and should be checked periodically.

What stops the tilting pivot from holding its angle during a long shoot?

The ratcheted metal handle provides the only locking force; if it is not fully engaged the pivot will slip under the continuous load of a mounted umbrella or strobe.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.