We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium studio clamp with 101 mm jaw opening and 16 mm pin and socket

Kupo

Kupo Super Viser Clamp End Jaw 6" 101mm

SKU CH-TM0D-QG08W

A heavy-duty clamp with a 101 mm jaw opening and 16 mm pin and socket for securing studio lighting and accessories

  • Firm hold on pipes up to 101 mm with 6-inch jaw opening
  • Lightweight yet sturdy aluminium die-cast body for professional use
  • Versatile mounting for lights and reflectors in photo or film sets
  • Quick repositioning via grooved shaft keeping jaws aligned
  • Expands with Convi Clamp accessories through built-in 16 mm socket

What the clamp is and who uses it

The Kupo Super Viser Clamp End Jaw is a 6-inch grip tool built from aluminium die-casting and steel. It serves photographers, film crews and stage technicians who need to secure lights, reflectors or accessories to tubes or planks up to 101 mm wide. The integrated 16 mm pin and 16 mm socket accept standard Convi Clamp accessories for flexible rigging.

What to verify on your rig first

Confirm the mounting surface does not exceed 101 mm in thickness, as the movable jaws are limited to that opening. Check that your accessories use a 16 mm pin or socket so they mate with the clamp’s dual receivers. The grooved threaded shaft keeps both jaws aligned in the same direction during tightening, which helps on round or flat stock.

Behaviour during extended use

The aluminium body stays lightweight while the steel components resist deformation under continuous load on set. Jaw alignment remains consistent because the shaft grooves prevent the two faces from rotating apart over long takes. The 16 mm socket and pin maintain a solid connection to accessories without play, even after repeated repositioning during a full shooting day.

Highlights

  • Firm hold on pipes up to 101 mm with 6-inch jaw opening
  • Lightweight yet sturdy aluminium die-cast body for professional use
  • Versatile mounting for lights and reflectors in photo or film sets
  • Quick repositioning via grooved shaft keeping jaws aligned
  • Expands with Convi Clamp accessories through built-in 16 mm socket

Specifications

No published specifications for this item yet.

Questions about this item

What is included with the Kupo Super Viser Clamp End Jaw 6" and do I need to buy any pins or sockets separately?

The clamp ships complete with a 16 mm pin fixed to the shaft end and a 16 mm socket built into the body, so no extra pins or sockets are required for standard Convi Clamp accessories.

Should I choose the 6" model with 101 mm jaw capacity or the longer 9" version KG603012 that opens to 228 mm?

Select the 6" version when mounting on tubes or planks up to 101 mm thick; choose the 9" KG603012 only if you need the wider 228 mm reach.

How does the 101 mm maximum jaw opening perform when clamped to a lighting stand or truss in a working studio?

The 101 mm opening secures the clamp firmly on pipes, tubes or planks up to that width, and the grooved shaft keeps both jaws aligned so the grip stays consistent during repositioning.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.