We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black aluminum light stand with square legs and leveling foot, collapsed to 35 inches, extends to 9.5 feet

Kupo

Kupo Medium Baby Kit Stand 9.5 ft 25 lb capacity

SKU CH-CKCS-48ZH9

A lightweight aluminum light stand extends to 9.5 ft, supports up to 25 lb, folds to 35 in, and includes a leveling leg for uneven ground

  • Robust square legs keep heavy gear steady on any surface
  • Holds 19.1 to 25 lbs for lights, modifiers and reflectors
  • Extends to 9.5 ft for high-angle and overhead setups
  • Collapses to 35-36 inches and weighs 6-7 lbs for easy transport
  • Leveling leg handles uneven ground on location shoots

Kupo Medium Baby Kit Stand 9.5 ft

The Kupo Medium Baby Kit Stand extends to 9.5 ft and supports loads from 19.1 to 25 lbs. Its square aluminium legs and welded stud provide a stable platform for lighting, reflectors and other studio gear. A built-in leveling leg compensates for uneven ground on location. The stand collapses to 35 to 36 inches for transport.

Thermals noise and power draw

This is a passive mechanical support with no electrical components, so it produces no heat, no fan noise and draws no power. The aluminium construction dissipates ambient warmth naturally. Operation is completely silent during adjustments and while holding equipment in place.

Upgrade path and when it matters

Replaces lighter-duty stands that cannot reach 9.5 ft or carry 25 lbs safely. The jump is worth it when you need the extra height for overhead lighting or the higher load rating for larger modifiers. Not suited for buyers who need a heavier stand rated above 25 lbs or a taller column beyond 9.5 ft.

Highlights

  • Robust square legs keep heavy gear steady on any surface
  • Holds 19.1 to 25 lbs for lights, modifiers and reflectors
  • Extends to 9.5 ft for high-angle and overhead setups
  • Collapses to 35-36 inches and weighs 6-7 lbs for easy transport
  • Leveling leg handles uneven ground on location shoots

Specifications

No published specifications for this item yet.

Questions about this item

How do I set up the 9.5 ft Kupo stand and what step do people often miss?

Extend the risers to the desired height up to 9.5 ft, then secure each collar. The step often missed is adjusting the leveling leg so the square legs sit flat on uneven ground.

What part of the 9.5 ft Kupo stand will need maintenance or replacement over time?

The free-sliding risers and locking collars should be checked periodically; clean grit from the aluminum tubes and tighten or replace worn collars to keep height adjustments smooth.

What limit appears first when the 9.5 ft Kupo stand is used continuously at full height with a heavy load?

Stability becomes the limiting factor; at 9.5 ft with a load near 25 lb the centre of gravity rises, so the square leg base and leveling leg must be perfectly set to prevent tipping.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.