We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black metal adapter with 5/8 inch receiver, about 4.1 inches long

Kupo

Kupo 5/8" Profoto Stand Adapter Plus studio

SKU CH-5JS0-CA67R

A 5/8″ receiver adapter that secures Profoto heads to standard light stands, weighing .24 lb and measuring 4.1″ long for stable, portable mounting

  • Secure mounting with robust design minimising wobble
  • Broad studio compatibility via 5/8" receiver
  • Long-lasting reliability from sturdy metal construction
  • Easy on-location transport at .24 lb weight
  • Precise strobe positioning with 4.1" extended length

Kupo 5/8" Profoto Stand Adapter

The Kupo 5/8" Profoto Stand Adapter Plus is built for photographers and videographers who need a secure mount for Profoto strobe heads, monolights, or other gear with a 5/8" female mount. Its robust metal construction minimises wobble during critical shoots. The adapter integrates with standard light stands via a 5/8" receiver for broad studio compatibility. It is not suited for users needing to mount equipment with different stud sizes or larger fixture types.

Thermals noise and power

This passive metal adapter has no electronics, fans, or power requirements, so it generates no heat, noise, or electrical draw during use. Its sturdy build simply transfers the weight of the mounted light to the stand without adding operational complexity. There are no thermal limits or acoustic signatures to consider in the studio or on location.

Bundled accessories and software

The product ships as a single standalone adapter with no included accessories, pouches, or software. The extended 4.1" length provides clearance from overhead pipes or booms for finer angle adjustment. A reliable screw mechanism secures equipment firmly, while the black finish resists wear. The unit weighs .24 lb for easy transport.

Highlights

  • Secure mounting with robust design minimising wobble
  • Broad studio compatibility via 5/8" receiver
  • Long-lasting reliability from sturdy metal construction
  • Easy on-location transport at .24 lb weight
  • Precise strobe positioning with 4.1" extended length

Specifications

No published specifications for this item yet.

Questions about this item

How do I mount the Kupo adapter on a light stand without wobble?

Insert the 5/8" stud into the stand's receiver and tighten the locking knob fully; the 4.1" extended length gives clearance from overhead pipes so the head can be angled without binding.

What part of the Kupo Profoto Stand Adapter Plus will need replacement first?

The screw mechanism that secures the 5/8" stud is the only moving component; with the all-metal construction there are no rubber seals or plastic bushings to degrade, so it typically lasts for years of daily studio use.

At what load does the 5/8" receiver start to flex during a long shoot?

The adapter weighs .24 lb and is built from solid metal; the 5/8" (16 mm) receiver holds standard Profoto monolights and strobe heads without measurable flex, and the limiting factor becomes the light stand's capacity rather than the adapter itself.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.