We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 40-inch C-stand with sliding leg and quick-release kit

Kupo

Kupo 40" Master C-Stand Sliding Leg Kit Quick-Release Black

SKU CH-26XM-H67AF

A 40-inch C-stand kit with sliding leg, 2.5-inch grip head and quick-release system supports 19.1 to 25 lbs up to 10.5 feet

  • Sliding leg levels the stand on uneven ground
  • Quick-release system speeds up setup and breakdown
  • Extends to 10.5 ft for high-angle lighting
  • Holds 19.1–25 lbs of lights and modifiers
  • Includes 2.5″ grip head and 40″ grip arm

40-inch Master C-Stand Kit

This Kupo C-stand kit includes a 40-inch grip arm, 2.5-inch grip head and sliding leg system. It is built for photographers and filmmakers who need a single, sturdy support for lights, flags or reflectors on location or in the studio.

19.1 to 25 lb load capacity

The stand holds between 19.1 and 25 lbs, so it handles most medium-sized modifiers and LED fixtures. Heavier overhead rigs or large HMI heads will exceed the rated limit and require a larger stand.

Aluminium and steel with quick-release

The frame uses aluminium and steel for durability under daily professional use. A patent-pending quick-release system and spring-loaded locating pin speed up setup and lock the sliding leg securely on uneven ground.

Highlights

  • Sliding leg levels the stand on uneven ground
  • Quick-release system speeds up setup and breakdown
  • Extends to 10.5 ft for high-angle lighting
  • Holds 19.1–25 lbs of lights and modifiers
  • Includes 2.5″ grip head and 40″ grip arm

Specifications

No published specifications for this item yet.

Questions about this item

Will the 40" grip arm and 2.5" grip head fit my existing lighting fixtures that use standard 5/8" studs?

Yes, the included 40" grip arm with hex stud and 2.5" grip head are designed for industry-standard 5/8" baby pins, so they will mount your current lights, flags, and reflectors without adapters.

How can I verify the sliding leg and quick-release system are locked securely before loading 25 lbs of gear?

Engage the spring-loaded locating pin on the sliding leg until it clicks into the detent; the quick-release lever should snap flush with the riser. Both audible clicks confirm the stand is level and locked for the full 19.1 to 25 lb capacity.

Does the kit ship with sandbags or a carry case, or do I need to buy those separately?

The box contains the C-stand riser, sliding leg base, 40" grip arm with hex stud, and 2.5" grip head only. Sandbags and a carry case are not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.