Kupo 4-Section Master High Cine Stand 14.6 ft 88.2 lbs Black

Kupo 4-Section Master High Cine Stand

The Kupo 4-Section Master High Cine Stand is a professional lighting support built from all-steel construction with a black finish. It features a 3-riser, 4-section design that extends to a maximum height of 14.6 feet. The stand supports equipment loads from 80 to 89 lbs, with a rated capacity of 88.2 lbs (40 kg). A triple-function universal head provides a female 1-1/8" junior receiver and a retractable 5/8" Baby stud for versatile mounting.

Practical limits of the 14.6 ft height

The stand reaches 175.1 inches at full extension, which suits high overhead lighting but requires adequate ceiling clearance indoors. Its 88.2 lb load rating accommodates heavy cine fixtures, yet exceeding this limit risks structural failure. The round leg design and included leveling leg enhance stability on uneven surfaces, though the maximum height increases the centre of gravity and demands careful positioning. Wind or accidental impact at full extension can destabilise the column despite the steel build.

Check mounting compatibility

Verify that your lighting fixtures use a 1-1/8" junior receiver or 5/8" Baby stud to match the universal head. Ensure your vehicle or storage area can accommodate the folded length of a 4-section steel stand. Confirm the shooting environment allows for the footprint of the round legs and leveling leg on location. Buyers needing a lighter stand for frequent travel or a smaller maximum height for low ceilings should consider alternative supports.