We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminum grip head with 28mm pin and dual V-jaws

Kupo

Kupo 4.5" Center Grip Head 28mm Pin

SKU CH-ERXM-PDMFR

Aluminum grip head with 28 mm pin clamps 5/8" or 3/8" studs and supports 2.45 kg loads

  • Robust aluminium construction withstands demanding professional use
  • Supports equipment up to 5.41 lb (2.45 kg) securely
  • Single gag mechanism delivers exceptional clamping force
  • 5 inch centre head enables precise angle adjustments
  • Junior 28 mm pin centres weight over the stand

Kupo 4.5" Center Grip Head

This grip head is a professional studio component built from robust aluminum. It mounts on a junior 28mm pin and uses dual V-jaws to clamp 5/8" or 3/8" studs and tubing. The single gag mechanism delivers strong clamping force for lights, cameras and overhead rigging accessories. The rotating disc design centers weight over the stand for stable positioning.

Suited for gaffers and riggers needing secure

The head accepts only 5/8" and 3/8" diameter studs or tubing, so it will not work with smaller diameter pins or accessories lacking those specific mounting points. It is not designed for loads exceeding the rated 5.41 lb capacity. Users needing different stud interfaces or higher weight ratings should select alternative hardware.

Junior 28mm pin with dual V-jaw clamping

The welded U-shape holder fixes the grip head to a junior 28mm (1-1/8") stud, centering the load directly over the light stand. Two rotating aluminum discs provide the V-jaws that accommodate both 5/8" and 3/8" mounting hardware. This specific stud size and jaw combination determines compatibility with existing grip equipment and overhead systems.

Highlights

  • Robust aluminium construction withstands demanding professional use
  • Supports equipment up to 5.41 lb (2.45 kg) securely
  • Single gag mechanism delivers exceptional clamping force
  • 5 inch centre head enables precise angle adjustments
  • Junior 28 mm pin centres weight over the stand

Specifications

No published specifications for this item yet.

Questions about this item

What size stud does the 28mm pin fit onto a stand with?

The welded junior 28mm (1-1/8") stud is designed to centre the weight over a standard junior stand receiver.

How do I secure a 5/8" or 3/8" accessory in the V-jaws without it slipping?

Tighten the single gag mechanism until the aluminum discs clamp firmly on the accessory stud or tubing; the rotating discs allow alignment before final locking.

When should I check the rotating disc holder and gag mechanism for wear?

Inspect the welded U-shape holder and clamping surfaces before each rig; replace the head if the aluminum shows deformation or the gag no longer holds 5.41 lb securely.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.