We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome-plated steel 24 inch baby stand extension with junior base and quarter-twenty thread

Kupo

Kupo 24" Baby Stand Extension 25 lb studio

SKU CH-VBMA-SJHHC

Adds 24 inches of height to light stands with a 25 lb capacity and 1/4"-20 thread

  • Adds 24 inches of height for elevated lighting angles
  • Chrome-plated steel construction resists corrosion for long studio life
  • Supports up to 25 lb of lights and modifiers securely
  • Junior 1-1/8" base socket converts when baby pin is unavailable
  • 1/4"-20 female thread on top expands mounting options

Kupo 24" Baby Stand Extension

The Kupo 24" Baby Stand Extension adds 24 inches of height to light stands using a chrome-plated steel tube. It is built for photographers and videographers who need to raise lights or modifiers above standard stand height in studio or location work.

25 lb load rating

The extension supports up to 25 pounds of equipment on its baby pin. This single capacity figure determines whether your light, modifier or combined rig can be mounted safely without exceeding the structural limit of the component.

Handles lights and modifiers up to 25 lb

A 20 lb LED panel with a softbox or a 25 lb Fresnel fits comfortably within the rated capacity. Heavier HMI heads or large multi-light arrays that exceed 25 lb will overload the extension and require a different support solution.

Highlights

  • Adds 24 inches of height for elevated lighting angles
  • Chrome-plated steel construction resists corrosion for long studio life
  • Supports up to 25 lb of lights and modifiers securely
  • Junior 1-1/8" base socket converts when baby pin is unavailable
  • 1/4"-20 female thread on top expands mounting options

Specifications

No published specifications for this item yet.

Questions about this item

How much extra height does the 24-inch extension add to a light stand?

It adds exactly 24 inches of vertical reach, letting you position lights or modifiers higher for overhead or creative angles without moving the base.

What does the 25 lb capacity mean for the gear I can mount?

You can safely hang lighting fixtures, softboxes or other accessories weighing up to 25 pounds on the baby pin without exceeding the rated limit.

What mount sizes does the base and top use so I know it fits my stands?

The base fits a junior 1-1/8 inch socket after removing the locking knob, while the top provides a baby pin with a 1/4"-20 female thread for smaller accessories.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.