Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00997563BTC
In stock
Kupo
Kupo 1" 1/4"-20 Female to Male Thread Adapter 5-Piece
Set of five 1-inch 1/4"-20 thread adapters converting female receivers to male studs for mounting spigots, tripod heads and other grip equipment
- Convert any 1/4"-20 receiver into a male stud with five 1" adapters
- Secure connections using an Allen key for reliable mounting during shoots
- Minimal weight of .04 lb per adapter keeps your rig portable
- Durable construction withstands frequent use in demanding conditions
- Five-piece set provides spares for multiple setups or backup needs
Five-piece thread adapter set
The Kupo set contains five identical adapters that convert a 1/4"-20 female receiver into a 1/4"-20 male stud. Each piece measures 1 inch (25.4 mm) long and weighs 0.04 lb, adding minimal mass to a rig. They are built for photography and videography gear that uses the standard 1/4"-20 thread.
Photographers and videographers needing multiple
The pack suits professionals who run several lighting or grip setups at once and want spare adapters on hand. It is not for anyone who requires a different thread pitch, a different stud diameter or a longer extension than the fixed 1-inch length. Buyers needing metric threads or 3/8-inch mounts must choose another product.
1-inch 1/4"-20 female-to-male conversion
The single specification that decides fit is the 1/4"-20 female-to-male thread conversion at a fixed 1-inch (25.4 mm) length. If your equipment uses that exact thread and the 1-inch spacing works for your mounting point, the adapter will connect securely with an Allen or hex key. Any other thread size or length requirement means this set will not work.
Highlights
- Convert any 1/4"-20 receiver into a male stud with five 1" adapters
- Secure connections using an Allen key for reliable mounting during shoots
- Minimal weight of .04 lb per adapter keeps your rig portable
- Durable construction withstands frequent use in demanding conditions
- Five-piece set provides spares for multiple setups or backup needs
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the Kupo 1/4"-20 adapter and what step is often missed?
Thread the male end into your 1/4"-20 receiver, then tighten fully with an Allen or hex key so the connection will not loosen under load.
What maintenance or replacement will these adapters need over time?
The five-piece set gives you spares; inspect threads for wear after heavy use and swap any adapter that no longer grips securely.
What is the first limit I will hit when using these adapters continuously?
Each adapter is 25.4 mm long and weighs 0.04 lb, so stacking several adds length and a small but measurable amount of weight to the rig.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
