Ksin
Ksin Vari Dual Monitor Arm 27" 19.8 lbs office equipment
Holds two monitors up to 27 inches and 19.8 lbs each with full 360-degree articulation and VESA 75x75mm or 100x100mm mounting
- TypeMonitor Stand
- Frees desk space by lifting two monitors off the surface
- Supports screens up to 27 inches and 30.9 lbs via 75x75mm or 100x100mm VESA
- Raises displays 12 inches for eye-level comfort while sitting or standing
- Each arm rotates 360 degrees with tension-assisted movement for precise positioning
- Clamps to desks up to 1.375 inches thick and installs in minutes
Dual monitor arm for 27 inch displays
The Ksin Vari Dual Monitor Arm holds two screens up to 27 inches wide and 30.9 lbs each on a VESA 75x75mm or 100x100mm mount. It raises monitors up to 12 inches off the desk and provides 360 degree rotation with tension-assisted movement. The clamp fits surfaces up to 1.375 inches thick for quick installation.
Check VESA pattern and desk thickness
Verify that both monitors use a 75x75mm or 100x100mm VESA mounting pattern before ordering. Confirm each screen weighs no more than 30.9 lbs and measures 27 inches or less diagonally. Ensure the desk or table edge is no thicker than 1.375 inches so the supplied clamp can secure the arm properly.
Replaces fixed dual monitor stands
This arm replaces static dual monitor risers that cannot tilt, swivel or rotate independently. The jump is worth it when you need to align two screens at eye level while sitting or standing and want to reclaim desk surface area. It is not for users whose monitors exceed the 27 inch or 30.9 lb limits or lack VESA mounting holes.
Highlights
- Frees desk space by lifting two monitors off the surface
- Supports screens up to 27 inches and 30.9 lbs via 75x75mm or 100x100mm VESA
- Raises displays 12 inches for eye-level comfort while sitting or standing
- Each arm rotates 360 degrees with tension-assisted movement for precise positioning
- Clamps to desks up to 1.375 inches thick and installs in minutes
Specifications
| Type | Monitor Stand |
|---|
Questions about this item
What comes in the box and do I need any extra hardware for monitors that use 75x75mm or 100x100mm VESA?
The arm ships with the dual-mount frame, two articulating arms, a desk clamp for surfaces up to 1.375 thick and the standard VESA hardware that fits 75x75mm and 100x100mm patterns. No extra brackets are required for those patterns.
My screens weigh 19.8 lbs each — is that within the per-arm limit?
Yes. Each arm supports up to 30.9 lbs, so a 19.8 lb monitor is well inside the capacity. The 19.8 lb figure in the product name refers to the weight of the arm assembly itself, not a load limit.
How high can I raise a 27 inch monitor above the desk with this arm?
The arm can lift the display up to 12 inches off the worksurface, giving plenty of clearance for a 27 inch screen at eye level whether you sit or stand.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



