KRAFT TOOL
KRAFT TOOL SK100 Power Troweler Blade Finish 6x14 in
Carbon steel finish blade sized 6 by 14 inches for smooth concrete troweling
- TypeMasonry Tools
- Weight2.55
- 6 in width covers more surface per pass
- 14 in length reduces overlap on large slabs
- Carbon steel construction resists wear through repeated use
- 55 weight keeps the trowel balanced during finishing
- Smooth control delivers consistent concrete finish quality
Replacement blade for power trowels
This Kraft Tool SK100 finish blade fits power trowels that accept a 6x14 in attachment. It is built for concrete professionals who need a reliable replacement to keep finishing work on schedule. The carbon steel construction resists wear during repeated passes over fresh concrete surfaces.
Practical limits of the finish blade
A finish blade is intended for the final smoothing passes after the concrete has firmed up. It will not remove high spots or level large irregularities the way a float or combo blade does. The 6 in width and 14 in length determine the contact area, so coverage per pass is fixed by those dimensions.
Capacity and headroom for concrete finishing
The blade handles standard finishing duties on slabs, driveways and floors where a smooth surface is required. Carbon steel holds its edge through multiple pours but will eventually dull or bend under heavy aggregate exposure. At 2.55 weight units it adds minimal mass to the rotor, preserving machine balance during extended runs.
Highlights
- 6 in width covers more surface per pass
- 14 in length reduces overlap on large slabs
- Carbon steel construction resists wear through repeated use
- 55 weight keeps the trowel balanced during finishing
- Smooth control delivers consistent concrete finish quality
Specifications
| Brand | Kraft Tool |
|---|---|
| Model | SK100 |
| Type | Masonry Tools |
| Weight | 2.55 |
Questions about this item
Which Kraft Tool finish blade size fits my 6-by-14-inch trowel?
The SK100 measures 6 in. wide by 14 in. long, matching that exact trowel footprint.
How does the 2.55 kg weight affect handling on the machine?
At 2.55 kg the blade adds enough mass for steady finishing passes without overloading the trowel’s drive.
What mounting standard does the SK100 use?
It follows the common 6-by-14-inch bolt pattern used on most walk-behind power trowels.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
