KRAFT TOOL
KRAFT TOOL CF157 Inside Curb Sidewalk Tool Storage
Inside curb and sidewalk tool storage designed for concrete finishing work
- Designed for precise inside curb finishing
- 6 inch width covers standard sidewalk edges
- 4 inch height shapes consistent concrete profiles
- 1/2 inch radius creates smooth, durable corners
- Kraft Tool CF157 model built for professional results
Professional Concrete Tool
The Kraft Tool CF157 inside curb sidewalk tool is built for concrete finishers who need a precise 1/2 inch radius on interior corners. Its 6 by 4 inch working surface provides enough contact area to smooth tight curves without skipping. The design suits contractors forming driveways, patios and walkways where consistent edge profiles matter.
Capacity and Headroom
The tool handles standard residential curb radii and sidewalk edges in a single pass, reducing the need for hand trowel touch-ups. It runs out of reach on larger commercial radii or deep recessed profiles where a longer handle or broader blade would be required. The fixed geometry limits adaptability to non-standard corner angles.
Thermals Noise and Power
As a hand-operated finishing tool it produces no heat, noise or electrical draw during normal use. Operator fatigue depends on concrete slump and finishing duration rather than any mechanical factor. The steel blade resists wear on abrasive mixes but offers no vibration damping beyond the handle grip.
Highlights
- Designed for precise inside curb finishing
- 6 inch width covers standard sidewalk edges
- 4 inch height shapes consistent concrete profiles
- 1/2 inch radius creates smooth, durable corners
- Kraft Tool CF157 model built for professional results
Specifications
| Brand | KRAFT TOOL |
|---|
Questions about this item
Will the CF157 fit alongside my existing 6-inch edging tools in the same storage rack?
The CF157 measures 6 inches by 4 inches with a 1/2-inch radius, so it matches the footprint of standard 6-inch curb tools and sits flush in most tool racks designed for that size.
How can I confirm the CF157 is seated correctly after placing it in my concrete forms?
When properly seated, the 1/2-inch radius edge aligns cleanly with the form board and the tool sits level across the full 6-inch width without rocking or gaps.
Does the CF157 ship with any mounting brackets or form pins, or must I supply those separately?
The package contains only the CF157 inside curb tool itself; mounting hardware, form pins, and fasteners are not included and must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
