KOSMEGAL 20 PSI SUP Electric Pump 12 V DC 120 W
A 12 V electric pump inflates paddle boards to 20 PSI in 13 minutes with auto shut-off and deflation
- Inlet Sizepump
- Outlet Sizepump
- MaterialPlastic
- Compatibility/FitmentAdhesives; Enamels; Epoxies
- Frequency Hznot_applicable
- Current TypeDC
- Inflates SUPs to 20 PSI maximum pressure
- Auto-off stops at your preset PSI, KPa, BAR or KG/CM²
- Deflation function clears boards fast for packing
- 12 V DC car connector powers 120 W motor anywhere
- Compact 9.5 × 7.5 × 3.5 in design stores in carry bag
Purpose and user
This electric air pump inflates stand-up paddle boards and other inflatables up to 20 PSI using a 12 V DC vehicle outlet. It is designed for paddlers, campers and boat owners who want fast, hands-free inflation with automatic shut-off.
Pre-purchase checks
Verify that your inflatable’s recommended pressure does not exceed 15 PSI for safe operation. Ensure your vehicle provides a 12 V DC socket and that the 126-inch power cable and 42-inch air hose reach the inflation point. Confirm the six included nozzles match your valve types before ordering.
Thermals, noise and power
The 120 W motor runs on 12 V DC and typically reaches 15 PSI in under 13 minutes. The manufacturer notes the housing gets hot after a few minutes and advises a 10-minute cool-down after every 20 minutes of continuous use.
Highlights
- Inflates SUPs to 20 PSI maximum pressure
- Auto-off stops at your preset PSI, KPa, BAR or KG/CM²
- Deflation function clears boards fast for packing
- 12 V DC car connector powers 120 W motor anywhere
- Compact 9.5 × 7.5 × 3.5 in design stores in carry bag
Specifications
| Inlet Size | pump |
|---|---|
| Outlet Size | pump |
| Material | Plastic |
| Compatibility/Fitment | Adhesives; Enamels; Epoxies |
| Frequency Hz | not_applicable |
| Current Type | DC |
| Housing Material | Acrylonitrile Butadiene Styrene |
| Impeller Material | Acrylonitrile Butadiene Styrene |
| Size/Dimensions | 12.4206 cm x 20.828 cm x 26.2128 cm |
| Item Count | 12 pack |
| Parts | 1 Year |
| Labor | 1 Year |
| Brand | AstroAI |
| Model | Hand Rivet Nut Setter Kit |
| Part Number | KSG-0206 |
Questions about this item
What comes in the box with the KOSMEGAL 20 PSI SUP Electric Pump and what must I buy separately?
The box contains the pump unit, a 126-inch DC car power cable, a 42-inch air hose, six nozzles including the H3 for paddle boards, and a carry bag. No separate purchases are required for standard inflation tasks.
Which pressure setting should I select on the pump for my stand-up paddle board?
The pump supports PSI, KPa, BAR and KG/CM² units. For a SUP the manufacturer recommends 10 PSI with a maximum of 15 PSI; do not exceed 15 PSI even though the pump can reach 20 PSI.
How long will the pump take to inflate my board to the recommended pressure in real use?
The pump reaches up to 15 PSI in under 12 minutes. A full cycle to the recommended 10 PSI will be faster, and the auto-off function stops the motor once the preset pressure is reached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



