We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue coiled power cable with 2-pin Lemo 0B male connectors on each end, extends 20 to 40 inches

Kondor Blue

Kondor Blue Lemo 2-Pin 0B Male Coiled Power Cable 20-40in

SKU CH-SC41-EG1V4

A coiled 2-pin Lemo 0B power cable that extends from 20 to 40 inches for flexible camera accessory connections

  • Reliable on-set power from ARRI cameras to Teradek devices via secure Lemo connectors
  • Durable coiled construction withstands rigorous production use for long-lasting performance
  • 2-pin Lemo 0B connectors ensure direct compatibility with ARRI and Teradek gear
  • Adjustable 20 to 40 inch coil prevents tangles and keeps workspace tidy
  • Blue colour coding allows quick cable identification among other set wiring

Professional Power Link

This Kondor Blue cable connects ARRI cameras to Teradek accessories using 2-pin Lemo 0B male connectors on both ends. It is built for film crews who need a dependable power path between camera bodies and wireless monitors or EVFs during production. The coiled design keeps the run tidy on rigs and gimbals.

Coiled Reach Limits

The cable stretches from 20 to 40 inches, so devices must sit within that range once the coil is extended. It cannot bridge longer distances between camera and accessory, and the fixed 0B pinout means it will not mate with 1-pin or 3-pin Lemo ports found on some other gear. Users needing a straight-run or different connector type must choose another cable.

Connector Pinout Decides Fit

The single specification that determines compatibility is the 2-pin Lemo 0B male interface on each end. Both the power source and the receiving device must present matching 0B sockets, otherwise the cable will not connect or deliver power.

Highlights

  • Reliable on-set power from ARRI cameras to Teradek devices via secure Lemo connectors
  • Durable coiled construction withstands rigorous production use for long-lasting performance
  • 2-pin Lemo 0B connectors ensure direct compatibility with ARRI and Teradek gear
  • Adjustable 20 to 40 inch coil prevents tangles and keeps workspace tidy
  • Blue colour coding allows quick cable identification among other set wiring

Specifications

No published specifications for this item yet.

Questions about this item

Which coiled length suits my rig — the 20 inch retracted or the 40 inch extended reach?

The cable coils to roughly 20 inches and stretches to about 40 inches, so choose the shorter setting for tight camera builds and the longer setting when the Teradek sits farther from the ARRI body.

What does the 2-pin 0B Lemo connector actually carry on set?

It passes DC power from an ARRI camera’s 2-pin 0B output to a Teradek monitor or wireless transmitter, so the accessory runs without its own battery.

Does the 0B Lemo interface limit voltage or current compared with larger Lemo sizes?

The 0B shell is rated for the low-voltage DC loads typical of camera accessories; it handles the current drawn by Teradek receivers and similar gear without a separate spec ceiling mentioned.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.