KnuKonceptz
KnuKonceptz KCA 1/0 Gauge 2-Channel Amp Wiring Kit Red
Complete 2-channel amplifier wiring kit with 18 ft power wire, 16 ft RCA cable, 250 A ANL fuse holder and 1/0 gauge ring terminals
- Oversized CCA conductors exceed AWG specifications for the stated gauge
- 18 ft ultra-flexible blue power wire reaches battery from amplifier location
- 5 ft ultra-flexible black ground wire supports short chassis grounding upgrade
- 250 A ANL fuse holder protects the entire installation from overcurrent
- 16 ft twisted-pair RCA cable delivers two-channel signal with noise rejection
1/0 Gauge Amplifier Wiring Kit
This KnuKonceptz KCA kit supplies the cables and hardware needed to install a two-channel amplifier in a vehicle. It uses oversized copper-clad aluminium conductors that exceed the stated American Wire Gauge specification. The red colour coding helps identify the power run during installation and future maintenance.
For Installers Staying Under 250 A Total Fuse Rating
The included ANL fuse holder carries a 250 A fuse so the kit suits systems whose combined amplifier fuse ratings remain below that figure. Builders planning multiple high-current amplifiers or a single amp fused above 250 A will need a larger-gauge kit with a higher-rated fuse holder.
Fits a Standard Battery-to-Amplifier Run
Eighteen feet of blue power wire reaches from the battery to a typical trunk or rear-seat amplifier location while sixteen feet of twisted-pair RCA cable carries the signal from the head unit. Five feet of black ground wire, ring terminals, a grommet and a firewall bushing complete the power path and free the installer from sourcing those parts separately.
Highlights
- Oversized CCA conductors exceed AWG specifications for the stated gauge
- 18 ft ultra-flexible blue power wire reaches battery from amplifier location
- 5 ft ultra-flexible black ground wire supports short chassis grounding upgrade
- 250 A ANL fuse holder protects the entire installation from overcurrent
- 16 ft twisted-pair RCA cable delivers two-channel signal with noise rejection
Specifications
No published specifications for this item yet.
Questions about this item
What amplifier fuse rating do I need for the 250 A ANL fuse in this kit to protect my system?
Add up all fuses on your amplifier; if the total is under 250 A the included ANL fuse holder and 250 A fuse will safely protect the installation.
Will the 16 ft two-channel twisted-pair RCA cable reach my rear-mounted amplifier from a front head unit?
The kit supplies 16 ft of two-channel twisted-pair RCA cable, which typically spans a front-to-rear run in most vehicles.
How can I verify the 18 ft blue power wire and 5 ft black ground wire are delivering full current after installation?
Measure voltage at the amplifier terminals with the system under load; minimal drop compared to battery voltage confirms the oversized CCA conductors are performing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
