Knoll Systems
Knoll Systems HD178 Projector Lamp 200W 3000 Hrs
A ready-to-install 200W replacement lamp module rated for 3,000 hours of use
- TypeProjector Lamp
- Wattage200W
- Lamp Life3,000 Hrs.
- Ready to install with fully assembled housing
- 200W Phoenix SHP bulb delivers reliable brightness
- Rated 3000 hours lamp life for extended use
- Manufactured to ISO9001 quality standards
- Compatible replacement for Knoll HD178 projectors
Knoll HD178 200W Replacement Lamp
The Knoll HD178 is a new 200W projector lamp module that ships fully assembled with bulb and housing for direct installation. It is designed for owners of compatible Knoll projectors who need a ready-to-fit light source rated at 3,000 hours of operation.
Upgrading from a dim or expired lamp
When the original lamp reaches the end of its rated 3,000-hour life or shows reduced brightness, this module restores the projector's output without requiring separate bulb handling. The jump is worth it if your current lamp has darkened the image, flickers, or the projector indicates a replacement cycle.
Check your projector model and lamp hour counter
Verify that your Knoll projector accepts the HD178 designation before ordering. Confirm the lamp hour counter reading to ensure the existing module has reached or is near the 3,000-hour threshold, and note that this unit is sold as a complete housing assembly rather than a bare bulb.
Highlights
- Ready to install with fully assembled housing
- 200W Phoenix SHP bulb delivers reliable brightness
- Rated 3000 hours lamp life for extended use
- Manufactured to ISO9001 quality standards
- Compatible replacement for Knoll HD178 projectors
Specifications
| Brand | Knoll |
|---|---|
| Type | Projector Lamp |
| Wattage | 200W |
| Lamp Life | 3,000 Hrs. |
Questions about this item
What housing does the Knoll HD178 lamp use for mounting?
It arrives as a fully assembled bulb and housing module that fits directly into the Knoll projector's lamp compartment.
What step do installers often skip when fitting the 200W Phoenix SHP bulb?
Resetting the projector's lamp-hour counter after installation so the 3,000-hour rating tracks correctly.
When will the 200W Phoenix SHP bulb need replacement?
After roughly 3,000 hours of use, the lamp reaches its rated life and should be swapped for a new module.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



