We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular bookshelf speaker with copper woofer and horn tweeter

Klipsch

Klipsch RP-500MBII Ebony bookshelf speaker

SKU CH-VK2Z-T1QFE

Two-way bookshelf speaker with 5.25" Cerametallic woofer and 90° Tractrix horn tweeter handling 75 W continuous power

  • TypeBookshelf Speakers
  • ChannelsSubwoofer Only
  • Sold AsSystem
  • Speakers ConfigurationMonitor
  • Driver Units6.5"
  • Power Rating300 watts
  • Horn loading maximises efficiency and detail
  • Vented tweeter housing reduces standing waves for clarity
  • Cerametallic woofer delivers low distortion and high efficiency
  • Dual binding posts enable bi-wiring or bi-amping
  • Two-way design with LTS titanium tweeter for detailed highs

Klipsch RP-500MBII Ebony bookshelf speaker

The Klipsch RP-500MBII is a passive bookshelf speaker system finished in Ebony. It uses a 5.25-inch Cerametallic woofer and a 1-inch LTS titanium diaphragm tweeter within a two-way design. A 90° x 90° silicone composite hybrid Tractrix horn controls high-frequency directivity. Dual input terminals allow bi-wiring or bi-amping configurations.

Who this suits and who should look elsewhere

This speaker suits listeners wanting detailed high-frequency reproduction from a compact monitor. The 27Hz low-frequency extension supports full-range playback in smaller rooms. Buyers needing higher continuous power handling above 75 watts or deeper bass extension below 27Hz without a subwoofer should consider different models.

Nominal impedance 4 Ohms

The nominal impedance is rated at 4 Ohms, which determines the amplifier current demand. Pairing requires an amplifier stable into 4-ohm loads to deliver the rated 300-watt peak power capability safely. This single specification decides whether your existing electronics can drive the speaker to its full potential without protection shutdowns.

Highlights

  • Horn loading maximises efficiency and detail
  • Vented tweeter housing reduces standing waves for clarity
  • Cerametallic woofer delivers low distortion and high efficiency
  • Dual binding posts enable bi-wiring or bi-amping
  • Two-way design with LTS titanium tweeter for detailed highs

Specifications

BrandGemini
SeriesRP-500M II Eby
ModelARIA926DW
Part NumberRP-500M II Eby
TypeBookshelf Speakers
ChannelsSubwoofer Only
Sold AsSystem
Speakers ConfigurationMonitor
Driver Units6.5"
Power Rating300 watts
Frequency Response27Hz - 120kHz
Nominal Impedance4 Ohms
ConnectorsWired
Power SupplyCorded Electric
ColorBlack
FeaturesPassive, RCA, dynamic_driver
Dimensions & Weight120×120×25mm 4.72*4.72*0.98in

Questions about this item

What are the cabinet dimensions of the RP-500MBII bookshelf speaker?

The cabinet measures 120 × 120 × 25 mm, which is 4.72 × 4.72 × 0.98 in.

How do I connect speaker wire to the dual binding posts for bi-wiring?

Remove the metal jumpers between the upper and lower terminals, then run separate cables from the amplifier to each pair of posts.

What driver components may need attention after extended use?

The 5.25 in Cerametallic woofer and 1 in LTS titanium tweeter are the only moving parts; surrounds and diaphragms can age over many years.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.