KLH
KLH M-8602-C In-Ceiling Speaker 6-pack
Six in-ceiling speakers with 6.5" Kevlar/Fiberglass woofers, 1" silk dome tweeters, 50Hz-20KHz response, 89dB sensitivity and 50-175W power handling
- TypeIndoor/Outdoor Speakers
- Six speakers deliver room-filling sound for whole-home audio
- 5" Kevlar/Fiberglass woofer produces deep, accurate bass response
- 1" Silk Dome tweeter renders crisp, natural high frequencies
- 50 Hz–20 kHz frequency range captures full musical detail
- 89 dB sensitivity ensures efficient output with modest amplifier power
Six-Speaker In-Ceiling Bundle
This bundle supplies six KLH M-8602-C in-ceiling speakers for whole-home audio distribution. Each unit uses a two-way sealed steel enclosure with a 6.5" Kevlar/Fiberglass woofer and a 1" Silk Dome tweeter. The 8-ohm nominal impedance suits standard stereo and multi-zone amplifiers. Buyers needing wireless streaming or powered zones must add separate components.
Mounting Tabs and Phoenix Connectors
Four mounting dog tabs per speaker secure the 7.2 lb enclosure into ceilings with an 8.75" mounting depth. The sealed, tuned metal cabinet reduces vibration transfer to building materials. Phoenix Connector inputs accept bare wire without soldering, speeding multi-room cable pulls. Installers without access above the ceiling plane will find the depth requirement restrictive.
Passive 50W-175W Power Range
The 50W to 175W recommended power window and 89dB sensitivity define the usable amplifier headroom. Frequency response spans 50Hz to 20kHz, so deep sub-bass extension is not available without a separate subwoofer. The 10.375" diameter trim sets the visible ceiling cutout size. Systems requiring higher SPL or lower impedance loads need different speakers.
Highlights
- Six speakers deliver room-filling sound for whole-home audio
- 5" Kevlar/Fiberglass woofer produces deep, accurate bass response
- 1" Silk Dome tweeter renders crisp, natural high frequencies
- 50 Hz–20 kHz frequency range captures full musical detail
- 89 dB sensitivity ensures efficient output with modest amplifier power
Specifications
| Type | Indoor/Outdoor Speakers |
|---|
Questions about this item
What power range does the 8-ohm M-8602-C handle in practice?
The speakers accept a recommended power range of 50W to 175W, so any amplifier rated within that window will drive them cleanly without risk of damage.
What ceiling cut-out and depth do the 10.375-inch M-8602-C units need?
Each speaker requires a mounting depth of 8.75 inches and fits a cut-out sized for its 10.375-inch frame; allow that clearance above the ceiling before installing.
How are the Phoenix Connector terminals wired on the M-8602-C, and what mistake should I avoid?
Strip each conductor, insert into the labelled Phoenix Connector slots, and tighten the screws; the common error is reversing polarity, so match positive to positive and negative to negative at both the speaker and the amplifier.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



