KLH
KLH M-8600-W In-Wall Speaker 4-pack
Four in-wall speakers with dual 6.5″ woofers and silk dome tweeters for 45Hz–20KHz response at 91dB sensitivity
- TypeIndoor/Outdoor Speakers
- Four speakers create immersive whole-home audio coverage
- Dual 6.5" Kevlar-fibreglass woofers produce deep 45 Hz bass
- 91 dB sensitivity works with 50–275 W amplifiers
- Silk dome tweeter extends response to 20 kHz
- 9" mounting depth fits standard wall cavities
Four-Speaker In-Wall Bundle
This bundle contains four KLH M-8600-W in-wall speakers designed for indoor or outdoor installation. Each unit uses a sealed and tuned two-way design with a 3/4" MDF back box and steel reinforcement. The speakers are sold as singles but packaged together for multi-room or surround setups.
Suits Whole-Home Audio Installs
Buyers planning a distributed audio system or a dedicated home-theatre wall will appreciate the consistent voicing across four identical units. The 8-ohm nominal impedance and 50 W to 275 W amplifier range fit most stereo or multi-channel receivers. Installers needing weather-rated enclosures or wireless streaming should look elsewhere.
Dog-Leg Mounts And Binding Posts Included
Six dog-leg mounting points per speaker simplify retrofit installation without specialised brackets. Five-way binding posts accept bare wire, spades or banana plugs for flexible cabling. The 3.9 mounting depth eases placement in standard stud cavities. No grille paint kit or calibration microphone is supplied.
Highlights
- Four speakers create immersive whole-home audio coverage
- Dual 6.5" Kevlar-fibreglass woofers produce deep 45 Hz bass
- 91 dB sensitivity works with 50–275 W amplifiers
- Silk dome tweeter extends response to 20 kHz
- 9" mounting depth fits standard wall cavities
Specifications
| Type | Indoor/Outdoor Speakers |
|---|
Questions about this item
What amplifier power range do I need to drive the M-8600-W speakers?
The speakers are rated for 50 to 275 watts of recommended amplifier power.
Will the 8-ohm nominal impedance of these speakers work with my older receiver?
Yes, the 8-ohm nominal impedance is compatible with most vintage and modern receivers.
How can I verify the speakers are performing correctly after installation?
Listen for balanced output across the 45Hz to 20kHz frequency range and confirm the 91dB sensitivity matches your amplifier's level.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



