Klein Tools
Klein Tools VDV001-081 8-in-1 Multi-Bit Screwdriver Nutdriver
Eight-in-one punchdown screwdriver includes 110/66 blade, two Phillips tips, two slotted tips, two nut drivers and a 3/8 hex key
- TypeMulti-Bit Screwdrivers
- Selling UnitEach
- Item Count1
- 8-in-1 design reduces tool bag clutter
- 75" shank reaches deep junction boxes
- 110/66 punchdown blade terminates data cables
- #1 and #2 Phillips tips cover common fasteners
- 1/4" and 3/8" nut drivers tighten hex hardware
Multi-bit screwdriver for low-voltage work
The Klein Tools VDV001-081 combines a punchdown blade for 110 and 66 blocks with interchangeable driver bits in a single 8 inch shaft. Technicians carrying one tool can terminate data cable, drive Phillips or slotted screws and turn 1/4 inch or 3/8 inch hex nuts without swapping handles.
Consistent torque across repeated terminations
The 2.75 inch shank length keeps the working tips close to the handle, reducing leverage loss when seating multiple wires on a patch panel. Because each bit seats directly in the magnetic holder, there is no play that would round screw heads during extended use on rack-mounted hardware.
Verify your block type and fastener sizes
The included punchdown blade is sized for 110 and 66 style insulation-displacement connectors only. The two Phillips tips cover #1 and #2, the slotted tips measure 3/16 inch and 1/4 inch, and the nut drivers fit 1/4 inch and 3/8 inch hex; confirm these match the hardware on site before ordering.
Highlights
- 8-in-1 design reduces tool bag clutter
- 75" shank reaches deep junction boxes
- 110/66 punchdown blade terminates data cables
- #1 and #2 Phillips tips cover common fasteners
- 1/4" and 3/8" nut drivers tighten hex hardware
Specifications
| Brand | Klein Tools |
|---|---|
| Model | VDV001-081 |
| Type | Multi-Bit Screwdrivers |
| Selling Unit | Each |
| Item Count | 1 |
| Shipping weight | 0.27 kg |
| Package size | 324 × 102 × 51 mm |
Questions about this item
How much force or vibration does the 2.75 inch shank transmit during all-day punchdown work?
The 2.75 inch shank is designed for punchdown impact, so repeated use will transmit noticeable vibration to the hand.
Which tips and drivers come in the box so I know what else I need?
The set includes a 110/66 punchdown blade, #1 and #2 Phillips tips, 3/16 and 1/4 inch slotted tips, 1/4 and 3/8 inch nut drivers, and a 3/8 inch hex key.
Can the 110/66 punchdown blade handle older 66-block terminations in my existing patch panel?
Yes, the reversible blade is marked for both 110 and 66 style blocks, so it works with older 66-block hardware.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
