Klein Tools
Klein Tools 32482 Insert Bit #1/3/16" 1/4" Hex PK2
Two-piece S2 steel insert bit set with Phillips #1 and 3/16-inch slotted tips on 1/4-inch hex shanks
- TypeScrewdriver Bits & Nutsetters
- Color/FinishGray
- Selling UnitPack
- Item Count2
- S2 steel resists wear for longer bit life
- Double-ended design gives two tips in one bit
- Fits 11-in-1 32500 and 10-in-1 32477 multi-tools
- 1/4-inch hex shank locks securely in holders
- Pack of two provides a ready spare
Insert Bit Pair for Multi-Bit Drivers
This pack contains two double-ended insert bits made from S2 steel with a carbide finish. Each bit combines a #1 Phillips tip and a 3/16 inch slotted tip on a single 1/4 inch hex shank. They are designed to fit Klein 10-in-1 and 11-in-1 screwdriver and nut driver models.
S2 Steel Durability in Extended Use
The S2 steel construction resists wear when driving multiple fasteners in sequence. The carbide finish adds surface hardness that helps maintain tip geometry over repeated cycles. These bits are not impact rated, so they are intended for hand-driven or low-torque drill applications rather than high-impact tools.
Double-Ended #1 Phillips and 3/16 Slotted
The defining specification is the dual tip profile: one end handles #1 Phillips screws while the other fits 3/16 inch slotted heads. This exact combination determines whether the bit matches the fasteners in your project. Buyers needing other tip sizes or single-ended bits will need a different part.
Highlights
- S2 steel resists wear for longer bit life
- Double-ended design gives two tips in one bit
- Fits 11-in-1 32500 and 10-in-1 32477 multi-tools
- 1/4-inch hex shank locks securely in holders
- Pack of two provides a ready spare
Specifications
| Brand | Klein Tools |
|---|---|
| Model | 32482 |
| Type | Screwdriver Bits & Nutsetters |
| Color/Finish | Gray |
| Selling Unit | Pack |
| Item Count | 2 |
Questions about this item
Will the 1/4" hex shank fit the 10-in-1 model 32477 I already use?
Yes, the bit is designed for the 32477 10-in-1 and the 32500 11-in-1 drivers.
Do I need a specific driver to use these bits?
They fit Klein 10-in-1 model 32477 and 11-in-1 model 32500 screwdriver/nut drivers.
Can I use these S2 steel bits with my older Klein multi-bit driver?
They are made for the 32477 10-in-1 and 32500 11-in-1 models; check your driver's bit holder size.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
