We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten chrome-plated brass angle stop valves with compression fittings

KISSLER AND CO., INC.

KISSLER AND CO., INC. Angle Stop Valve Brass Compression PK10 88-9215

SKU CH-PDRD-XQ3ZR

Pack of ten brass angle-stop valves with 1/4-turn handles and compression fittings rated to 250 psi

  • TypeSingle Hole Faucets
  • Quarter-turn handle enables fast water shut-off
  • Brass body with chrome plating resists corrosion
  • Dual compression fittings suit 5/8 in and 3/8 in supply lines
  • Rated for 250 psi maximum operating pressure
  • Pack of ten valves covers multiple installation points

10-Pack Angle Stop Valves

These brass compression valves control water flow to fixtures with a quarter-turn handle. Each unit features a chrome-plated finish and two female compression connections measuring 5/8 inch and 3/8 inch. The pack contains ten identical valves for multiple installation points.

Suited for standard supply-line shut-offs

Installers fitting compression supply lines to toilets, sinks or appliances will find the required connection sizes and 250 psi pressure rating. Projects that need push-fit, sweat or threaded connections, or a different port diameter, will require alternative valve types.

Dual compression ports: 5/8 in and 3/8 in

The inlet accepts a 5/8 inch compression nut while the outlet takes a 3/8 inch compression nut, both female. This specific port pairing determines whether the valve matches the existing supply tubing and fixture risers on the job.

Highlights

  • Quarter-turn handle enables fast water shut-off
  • Brass body with chrome plating resists corrosion
  • Dual compression fittings suit 5/8 in and 3/8 in supply lines
  • Rated for 250 psi maximum operating pressure
  • Pack of ten valves covers multiple installation points

Specifications

BrandKISSLER & CO
TypeSingle Hole Faucets

Questions about this item

How often should the compression fittings on the 88-9215 angle stop valves be checked or replaced?

Inspect the 5/8 in and 3/8 in compression connections periodically for drips; replace the brass ferrules if corrosion or persistent seepage appears after re-tightening.

What is the maximum continuous pressure the 88-9215 brass valve body can handle before leaking?

The valve is rated for 250 psi operating pressure; sustained pressure above that level will exceed the design limit and risk seal failure.

Does the 1/4-turn handle on the PK10 valves generate noticeable vibration or heat during all-day water flow?

The quarter-turn ceramic disc operates without vibration; brass body and chrome finish dissipate heat so the valve stays near water temperature during continuous use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.