We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
12 inch toilet supply line with stainless steel braided hose and brass compression fitting

KISSLER AND CO., INC.

KISSLER AND CO., INC. 88-2008 Toilet Supply Line 12in accessory

SKU CH-NKDA-843AK

Connects a toilet to the water supply with a 12-inch stainless-steel braided PVC hose rated for 250 psi at 70 °F

  • MaterialPlastic
  • 12-inch length fits standard toilet installations
  • PVC inner tube with stainless-steel cover resists corrosion
  • Brass and plastic compression fittings ensure leak-free connections
  • Certified to IAPMO and NSF standards for potable water
  • Rated 250 psi at 70 °F with a 40–180 °F temperature range

Toilet supply line for standard connections

The KISSLER 88-2008 is a 12-inch toilet connector built to join a 3/8-inch compression inlet with a 7/8-inch FIP outlet. It suits residential and light-commercial installations where a flexible, code-compliant link between the stop valve and the tank is required.

Stainless-steel covered PVC hose

A PVC inner tube rated for 250 psi at 70 °F handles water from 40 °F to 180 °F, while the stainless-steel cover resists abrasion and crushing. Brass on the compression side and plastic on the FIP side reduce galvanic corrosion risk without needing dielectric unions.

IAPMO and NSF certified for potable water use

The bulk-hose configuration arrives ready to thread onto existing supply stops and tank shanks, so no special tools or adapters are necessary. Installers should verify that the 12-inch length provides enough slack for their specific rough-in before cutting or bending the line.

Highlights

  • 12-inch length fits standard toilet installations
  • PVC inner tube with stainless-steel cover resists corrosion
  • Brass and plastic compression fittings ensure leak-free connections
  • Certified to IAPMO and NSF standards for potable water
  • Rated 250 psi at 70 °F with a 40–180 °F temperature range

Specifications

MaterialPlastic
BrandKISSLER & CO

Questions about this item

Will the PVC hose or stainless-steel cover need periodic replacement?

The 12 in PVC hose with stainless-steel cover is rated for 250 psi at 70 °F and a 40–180 °F range; inspect annually and replace if cracks, bulges or corrosion appear.

What pressure or temperature limit is reached first during continuous toilet use?

The line is certified to 250 psi at 70 °F and 180 °F maximum; typical household pressure and cold-water temperature stay well below both limits.

Does the braided supply line transmit vibration or heat into the bathroom when the toilet runs all day?

Stainless-steel cover dampens vibration, and the PVC core stays near supply-water temperature, so no noticeable noise or heat is added during normal operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.