We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome tub spout with pull-up diverter, slip-fit connection

KISSLER AND CO., INC.

KISSLER AND CO., INC. 82-0014 Tub Spout 5-1/8" Dia. Chrome bath hardware

SKU CH-CVCV-01AN3

A slip-fit tub diverter spout with 1/2-inch copper connection and pull-up diverter in chrome finish

  • TypeManual Faucet
  • Universal slip-fit installs on 1/2 in copper without threads
  • Pull-up diverter redirects water to shower with one motion
  • Chrome finish resists corrosion and matches common bath fixtures
  • 5-1/4 in spout reach directs flow into the tub basin
  • Ligature-resistant design improves safety in shared bathrooms

Tub Spout with Pull-Up Diverter

This chrome tub spout fits a standard half-inch copper slip connection. It is intended for universal tub installations where a slip-fit diverter is required. The spout reach measures 5 1/4 inches from the wall surface. No handles or trim plates are included or needed.

Half-Inch Copper Slip Connection

The single specification that determines compatibility is the 1/2 inch copper slip-fit inlet. The spout slides over bare copper tubing and secures with a set screw. It will not thread onto galvanised, PEX or CPVC pipe without a proper transition fitting.

Slip-Fit Installation Notes

Installation requires clean, deburred copper pipe cut to the correct insertion depth. The most common issue is an insufficient pipe length behind the finished wall, which prevents the spout from seating fully. Verify the rough-in dimension before finishing the wall. No ligature-resistant hardware is supplied.

Highlights

  • Universal slip-fit installs on 1/2 in copper without threads
  • Pull-up diverter redirects water to shower with one motion
  • Chrome finish resists corrosion and matches common bath fixtures
  • 5-1/4 in spout reach directs flow into the tub basin
  • Ligature-resistant design improves safety in shared bathrooms

Specifications

BrandKissler & Co
TypeManual Faucet

Questions about this item

How far does the 5-1/4 in spout reach extend into the tub?

The spout reach is 5 1/4 in, measured from the wall surface to the water outlet, giving standard coverage for most tub widths.

What does the 1/2 in copper slip connection mean for installation?

It slides onto 1/2 in copper pipe without threads and is secured with a set screw, so no soldering or threading is required.

What wall clearance does the slip-fit design need behind the escutcheon?

The slip-fit body requires enough depth behind the finished wall for the copper pipe to insert fully before the set screw is tightened.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.