We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small metal box with two RJ45 ports and a selector switch

Kisdoo NW021 2-port RJ45 Gigabit switch module

SKU CH-V5MQ-0Z7CG

A passive A/B selector switches one Ethernet or telephone line between two RJ45 devices at up to 1000 Mbps

  • Supported ModelDesktop
  • Specifications1 gigabits_per_second, 2, RJ45, Desktop
  • FeaturesDesktop, RJ45, 1 gigabits_per_second, 2
  • Plug-and-play operation with no power adapter or driver needed
  • Switches between two RJ45 or RJ11 devices with a single selector
  • Supports 100 Mbit/s and 1000 Mbit/s Ethernet speeds
  • Durable metal enclosure for stable signal transmission
  • Manual A/B switching for 1-in-2-out or 2-in-1-out configurations

Two-port Gigabit RJ45 switch module

The Kisdoo NW021 is a passive A/B selector that routes a single RJ45 link to one of two connected devices. It handles 100M and 1000M Ethernet as well as eight-wire telephone circuits without any external power or driver installation.

Desktop users needing manual port switching

This module suits anyone who wants to share one network drop or phone line between two endpoints by flipping a physical switch. It will not serve buyers who require both ports active simultaneously or who need automatic switching between connected devices.

Fits a desktop cable run with no power socket

The metal enclosure connects inline between the wall jack and the two target devices using standard RJ45 patch leads. Because it draws no power, it adds no load to a UPS or power strip and leaves the surrounding outlet free for other equipment.

Highlights

  • Plug-and-play operation with no power adapter or driver needed
  • Switches between two RJ45 or RJ11 devices with a single selector
  • Supports 100 Mbit/s and 1000 Mbit/s Ethernet speeds
  • Durable metal enclosure for stable signal transmission
  • Manual A/B switching for 1-in-2-out or 2-in-1-out configurations

Specifications

Brandkisdoo
ModelNW021
Part NumberNW021
Supported ModelDesktop
Specifications1 gigabits_per_second, 2, RJ45, Desktop
FeaturesDesktop, RJ45, 1 gigabits_per_second, 2

Questions about this item

What Ethernet cables do I need to connect the two RJ45 ports on this NW021 selector?

Use standard RJ45 patch cables rated for at least 1000 megabits per second to match the gigabit capability of each port.

Can I keep my 100 megabit per second router connected to one side while using the other port at gigabit speed?

Yes, the selector passes the signal through without conversion, so each link runs at the highest speed both ends support.

How can I confirm the NW021 is switching traffic correctly after I press the A/B button?

The active port LED lights up and the connected device immediately shows a live link with full duplex at the negotiated speed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.