We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear in-ear monitors with ear fins and 3.5mm cable

KINYO Melody Clear 1DD+1BA 16Ω 3.5mm 34g

SKU CH-62EZ-90BKN

Wired hybrid IEM with 10 mm dynamic and balanced-armature drivers, 16 Ω impedance, 110 dB sensitivity, 3.5 mm plug and 34 g total weight

  • TypeIn-Ear
  • ColorClear
  • Driver Unit10 millimeters
  • THDIn Ear
  • Input Impedance16 ohms
  • Signal to Noise Ratio(SNR)110 decibels
  • Hybrid 1DD+1BA drivers deliver detailed sound
  • 16 Ω impedance works with any 3.5 mm source
  • 34 g total weight keeps listening light
  • TPE ear tips plus fins give secure fit
  • 110 dB sensitivity provides loud output

Target use

KINYO Melody Clear in-ear monitors combine a 10 mm dynamic driver with a balanced armature for wired listening. The 16 ohm impedance and 110 dB sensitivity suit portable sources without extra amplification. Musicians, singers and stage performers gain a lightweight reference option.

Sustained behaviour

Hybrid driver topology distributes low and high frequencies across separate units, helping maintain tonal balance during long sessions. PC cavity with UV varnish resists heat buildup from continuous playback. TPE ear fins and memory hooks keep fit stable over hours.

Setup check

Verify your source provides a 3.5 mm analogue output; the cable terminates in a standard 3.5 mm plug. Confirm you can use a detachable 2-pin connector if cable replacement is desired. Ensure ear-tip selection matches your ear canal for proper isolation.

Highlights

  • Hybrid 1DD+1BA drivers deliver detailed sound
  • 16 Ω impedance works with any 3.5 mm source
  • 34 g total weight keeps listening light
  • TPE ear tips plus fins give secure fit
  • 110 dB sensitivity provides loud output

Specifications

BrandKINYO
Series1
ModelMelody, YinLX66813E1TTB-BC01, Yinyoo
Part NumberYinyoo
TypeIn-Ear
ColorClear
Driver Unit10 millimeters
THDIn Ear
Input Impedance16 ohms
Signal to Noise Ratio(SNR)110 decibels
Power Supplyfalse
Sensitivity110 decibels
Connector3.5mm
Ear CouplingSingle Ear
Cord LengthUser Manual
Weight34 grams
Noise Cancellingsound_isolation
Wireless TypeIR
Microphone Impedance16 ohm
Microphone Signal to Noise Ratio(SNR)110 decibels
Microphone Sensitivity110 decibels
Featuressound_isolation, Detachable, Media Control, remote, Wired, In Ear, dynamic_driver, 16 ohm, Cable
Package ContentsCable, Eartip, User Manual

Questions about this item

How much heat or noise do the 10 mm hybrid drivers add during all-day listening?

Passive in-ear design with 16 Ω impedance and 110 dB sensitivity means no active circuitry, so the earphones generate no heat and add no electronic noise.

Which source device must I already own for the 3.5 mm plug to work?

Any device with a standard 3.5 mm audio output — smartphone, tablet, laptop, MP3 player or portable recorder — will drive the 16 Ω load directly.

Will the 3.5 mm connector and 16 Ω impedance work reliably with an older portable CD player or cassette deck?

Yes, the 3.5 mm plug and 16 Ω input impedance match legacy portable players, and the 110 dB sensitivity provides ample volume from low-power outputs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.