Kingston Technology Corp.
Kingston Technology Corp. KF432S20IB/8 8GB DDR4 3200 CL20 laptop RAM
8GB DDR4 3200 CL20 SO-DIMM laptop memory runs at 1.20V with 20-22-22 timing
- Capacity8GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL20
- Timing20-22-22
- Voltage1.20V
- DDR4 3200 speed accelerates gaming and multitasking
- CL20 latency keeps data flowing smoothly
- 20V operation reduces heat and power draw
- Plug N Play auto-overclocking reaches top frequency without BIOS changes
- Intel XMP and AMD Ryzen ready for broad laptop compatibility
Compact DDR4 SO-DIMM for Notebooks
Kingston Fury Impact 8GB 260-Pin DDR4 SO-DIMM runs at 3200 MT/s with CL20 timings and 1.20V operation. It is built for notebook and small-form-factor upgrades where a single 8GB module fits the available slot. Plug N Play automatic overclocking and Intel XMP certification simplify installation for users who want a direct performance lift without manual tuning.
Suited for DDR4 Laptop Upgrades
This module serves owners of DDR4-compatible laptops or compact systems needing 8GB of 3200 MT/s memory with CL20 latency. It is not for buyers whose devices require a different pin count or voltage than the 260-pin 1.20V specification, nor for those who need a higher total capacity than a single 8GB stick provides.
260-Pin DDR4 3200 CL20 Specification
The decisive spec is the 260-pin DDR4 interface operating at 3200 MT/s with CL20 timings at 1.20V. Verify that your notebook or small-form-factor board accepts 260-pin DDR4 SO-DIMMs at this speed and voltage before purchase; mismatched pin counts or voltage requirements will prevent the module from seating or functioning.
Highlights
- DDR4 3200 speed accelerates gaming and multitasking
- CL20 latency keeps data flowing smoothly
- 20V operation reduces heat and power draw
- Plug N Play auto-overclocking reaches top frequency without BIOS changes
- Intel XMP and AMD Ryzen ready for broad laptop compatibility
Specifications
| Brand | Kingston |
|---|---|
| Series | Fury Impact |
| Model | KF432S20IB/8 |
| Capacity | 8GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL20 |
| Timing | 20-22-22 |
| Voltage | 1.20V |
| Features | Power Supply: VDD = 1.2V Typical VDDQ = 1.2V Typical VPP = 2.5V Typical VDDSPD = 2.2V to 3.6V On-Die termination (ODT) 16 internal banks; 4 groups of 4 banks each Bi-Directional Differential Data Strobe 8 bit pre-fetch Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop) Height 1.18" (30.00mm) |
| Shipping weight | 0.04 kg |
| Package size | 170 × 56 × 15 mm |
Questions about this item
Should I pick the 8GB DDR4 3200 CL20 module or look for a different capacity?
This listing is the single 8GB stick at DDR4 3200 with CL20 timing. If your laptop has two slots you can add a second identical module later for 16GB total.
What does the 3200MHz rating actually deliver once the module is installed?
The module runs at DDR4 3200 (PC4 25600) with 20-22-22 timings at 1.20V. Plug N Play lets it step up to that speed automatically on compatible systems.
Does the 260-pin SO-DIMM interface limit the bandwidth or latency in practice?
The 260-pin DDR4 SO-DIMM form factor carries the full 3200MT/s data rate. Bandwidth and latency are set by the 20-22-22 timings and 1.20V operation, not by the connector itself.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sunfounder Raspberry Pi Ultimate Kit with PiCrawler AI Robot 337 components 131 projects
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink



