We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Kingston Technology Corp.

Kingston Technology Corp. KCP424SD8/16 16 GB DDR4 SO-DIMM 260-pin accessory

SKU CH-4MSX-6PFYD MPN KCP424SD8/16

16 GB DDR4 SO-DIMM laptop memory module running at 2400 MHz with 260 pins

  • 16 GB DDR4 memory expands laptop capacity
  • 260-pin SO-DIMM fits standard DDR4 laptop slots
  • 2400 MT/s DDR4-2400 speed supports responsive multitasking
  • PC4-19200 bandwidth handles demanding workloads
  • 2Rx8 dual-rank organisation improves memory throughput

Laptop memory upgrade for DDR4 systems

This 16 GB DDR4 SO-DIMM module fits laptops that accept 260-pin memory at 2400 MT/s. It targets users who need a single stick to reach a higher total capacity or to replace a failed module. The 2Rx8 organisation suits mainstream notebook platforms that support dual-rank operation.

Low-voltage operation keeps thermals modest

DDR4 runs at 1.2 V, so the stick adds little heat inside a tight chassis. Passive cooling from the laptop’s existing airflow is normally sufficient, and there are no moving parts to generate noise. Power draw scales with the 2400 MT/s bus speed and the 16 GB density.

Standard SO-DIMM layout simplifies installation

The 260-pin edge connector matches the slot found in most DDR4 laptops, so no adapter or special tool is required. Builders should verify that the system supports 16 GB per slot and dual-rank modules before purchase. The green PCB and black components follow the usual JEDEC form factor.

Highlights

  • 16 GB DDR4 memory expands laptop capacity
  • 260-pin SO-DIMM fits standard DDR4 laptop slots
  • 2400 MT/s DDR4-2400 speed supports responsive multitasking
  • PC4-19200 bandwidth handles demanding workloads
  • 2Rx8 dual-rank organisation improves memory throughput

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the KCP424SD8/16 260-pin SO-DIMM, and what step do people often miss?

Align the notch on the module with the slot key, insert at an angle, then press down firmly until both side clips click; the step often missed is verifying both clips have fully locked.

What maintenance or replacement will the 16 GB DDR4 module need later?

No scheduled maintenance is required; replacement is only needed if the module fails or if a future upgrade demands more than 16 GB capacity.

What limit appears first on the PC4-19200 DDR4-2400 memory under sustained heavy workloads?

The bus speed of 2400 MT/s sets the maximum data rate; sustained loads cannot exceed this bandwidth ceiling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.