KINGSTON BRASS
KINGSTON BRASS KS8665EL two-handle 4 in. centerset shower faucet oil rubbed bronze
A two-handle 4 in. centerset lavatory faucet with solid brass construction, ceramic disc cartridges, 2.2 GPM flow rate at 60 PSI, and a matching brass pop-up drain in oil rubbed bronze
- Solid brass construction ensures lasting durability
- Drip-free ceramic cartridge provides reliable leak prevention
- 2 GPM flow rate delivers efficient water usage
- Oil rubbed bronze finish resists tarnishing and corrosion
- Matching brass pop-up drain included for complete installation
Two-handle centerset lavatory faucet
The Kingston Brass KS8665EL is a two-handle centerset faucet designed for three-hole sink installations with a four-inch spread. Solid brass construction provides durability for daily residential use. The oil rubbed bronze finish resists tarnishing and corrosion over time. Quarter-turn ceramic disc cartridges deliver drip-free on and off control.
Thermals noise and power draw
Water flow is rated at a maximum of 2.2 gallons per minute at 60 PSI, equivalent to 8.3 litres per minute. An integrated removable aerator helps maintain a consistent stream while reducing splatter. The quarter-turn ceramic cartridges operate smoothly without requiring high torque. No electrical power or active cooling is involved in normal operation.
Build quality and connectors
Brass pop-up drain assembly is included to match the faucet finish. Half-inch IPS male threaded shank inlets connect directly to standard supply lines. Spout reach measures five inches with a height of seven and one-half inches and clearance of three and one-half inches. EL handle style complements the traditional centerset layout. Not suited for single-hole or widespread sink configurations.
Highlights
- Solid brass construction ensures lasting durability
- Drip-free ceramic cartridge provides reliable leak prevention
- 2 GPM flow rate delivers efficient water usage
- Oil rubbed bronze finish resists tarnishing and corrosion
- Matching brass pop-up drain included for complete installation
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the three-hole 4 in. centerset faucet and what step is often missed?
Mount the faucet through the three sink holes on 4 in. centers, connect the 1/2 in. IPS male threaded shank inlets to supply lines, and remember to fit the included brass pop-up drain assembly before tightening everything.
Which part will need replacement first and how often?
The ceramic disc cartridges and removable aerator are the wear items; cartridges typically last years but can be swapped by removing the handle and bonnet nut, while the aerator should be cleaned or replaced if flow drops below 2.2 GPM.
What limits flow during extended use?
The integrated aerator caps output at 2.2 GPM (8.3 LPM) at 60 PSI, so sustained flow cannot exceed that rate regardless of supply pressure.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



