KINGSTON BRASS
KINGSTON BRASS KS8131DPL Paris Freestanding Tub Faucet with Hand Shower, Polished Chrome
Freestanding tub faucet with hand shower, solid brass, ceramic disc cartridge, 6.9 GPM flow at 80 PSI, ADA lever, floor mount
- TypeTools
- Solid brass construction ensures lasting durability
- Drip-free ceramic disc cartridge prevents leaks
- Freestanding floor mount creates striking bathroom focal point
- Single lever handle meets ADA accessibility guidelines
- 9 GPM maximum flow rate at 80 PSI delivers strong water pressure
Freestanding Tub Faucet with Hand Shower
The Kingston Brass KS8131DPL Paris is a single-handle freestanding tub faucet with an integrated hand shower. Solid brass construction and a drip-free ceramic disc cartridge are built for durability. The polished chrome finish suits contemporary bathroom designs. It is intended for floor-mount installation beside a freestanding tub.
Upgrade From Wall-Mounted Fixtures
This model replaces wall-mounted tub fillers when a freestanding tub sits away from the wall. The 32-3/8 inch spout clearance and 9-5/16 inch reach deliver water directly into the tub basin. The jump is worth it when the tub position demands a floor-mounted supply and a cleaner look without wall penetrations.
Floor-Mount Installation Requirements
The faucet connects via 1/2 inch IPS fittings located under the floor. Supply lines must be roughed in below the finished floor before the unit is secured. The single lever handle meets ADA guidelines for accessible operation. The hand shower adds rinsing flexibility while the 6.9 GPM spout flow rate at 80 PSI fills the tub quickly.
Highlights
- Solid brass construction ensures lasting durability
- Drip-free ceramic disc cartridge prevents leaks
- Freestanding floor mount creates striking bathroom focal point
- Single lever handle meets ADA accessibility guidelines
- 9 GPM maximum flow rate at 80 PSI delivers strong water pressure
Specifications
| Brand | KINGSTON BRASS |
|---|---|
| Type | Tools |
Questions about this item
How much floor clearance does the 32-3/8" spout height require above the tub rim?
The spout sits 32-3/8" above the floor, so allow at least that much vertical space from the finished floor to any overhead obstruction.
What is the correct way to connect the 1/2" IPS supply lines under the floor before setting the faucet body?
Rough-in the hot and cold 1/2" IPS connections in the floor, pressure-test them, then lower the faucet onto the connections and secure the mounting flange — do not tighten the faucet first and then try to thread the supplies.
Which part should be inspected first if the 6.9 GPM flow drops noticeably after a year of use?
Remove and clean the ceramic disc cartridge and the hand-shower inlet filter; mineral build-up on either will reduce the 6.9 GPM maximum flow rate.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



